Boxes

MAG Box

How to setup IPTV on MAG Box?

How to setup IPTV on a MAG device

Step 1: When the box is being loaded the main portal screen appears. After that click on “settings”, press remote button “SETUP/SET”.

Step 2: Then press on “System settings” and click on “Servers”.

 Step 3: Select “Portals”.

Step 4: In the “Portal 1 name” line enter the following ” IPTV “.
In the “Portal 1 URL” enter the portal address provided by your IPTV distributor. First, you must provide your device Mac address which can be found on the back side of your box to your IPTV distributor.

Step 5: When all the operations listed above is done, then press “OK”.
When the settings are being saved click “EXIT” on the remote control and press option “General”.
In the “NTP server,” line enter the following address “pool.ntp.org or us.pool.ntp.org“ for North America.

Press “OK” to save the changes you made.

When all the steps listed above are done press”EXIT” 2 times on the remote control and restart the portal.

Now everything is ready to start watching Live TV…

Password for adult content

The password for adult content on MAG is usually 0000 unless it is changed manually by the user.

Developed by iptvhelpcenter.net

How to change Portal address on MAG?

Sometimes you may require changing your portal address to another IPTV provider and the steps below will guide you through the entire process of changing your portal address on your MAG box.

How to Change the Portal Address

Turn off the box and remove its power line, then unplug the cable between the box and the router.

Turn on the box without the cable to the modem.
Wait until you see the “Loading Portal” on the screen.
On the remote control press the “SET” button.
Go to the Settings and press “OK“.

Press the “SET” button on the remote control again.
Go down to Servers and press “OK“.

Go to the Portal 1 URL and delete ALL the text (to delete use the back button on the remote).
Press the “KB” button on the top right of the remote. It is like a keyboard picture.
Enter the new portal address.
Press the “KB” button on the remote so the keyboard goes OFF the screen, go down the bottom of the screen and select “OK“.
Plug in the Cable that goes from the box to the modem, then go to reload portal or restart the TV Box using the power supply.

Developed by iptvhelpcenter.net

How to setup IPTV on MAG with M3U url?

In this tutorial, we will demonstrate the process of enabling IPTV channels on your MAG 4XX and 5XX devices (such as MAG410, MAG420, MAG425, MAG500, MAG520, MAG524, etc.). It’s important to note that MAG 4XX and 5XX devices are not supported by IPTV providers with the portal system. However, we will provide an alternative solution to bring IPTV to your MAG box.

How to use M3U url to setup IPTV MAG

Step 1: Download the M3U url which provided by the IPTV provider.

Step 2: Copy/paste this static M3U file to a USB storage.

Step 3: Insert the USB storage to your MAG.

How to use M3U url to setup IPTV MAG step 3

Step 4: Once mag box shows the login screen click on embedded portal.

Step 5: Click on Home Media.

How to use M3U url to setup IPTV MAG step 5

Step 6: Scroll down and click on your USB.

How to use M3U url to setup IPTV MAG step 6

Step 7: Find and click on the M3U file in the USB storage.

How to use M3U url to setup IPTV MAG usb storage

Step 8: Click “Open”.

open

Step 9: A window will appear saying *Open playlist* , Now use F3 (yellow button on remote).

open playlist

Step 10: The m3u file is added to the IPTV section of the Home Media section.

Step 11: Use “Back” button to return to the portal page and to “IPTV channels”

Now everything is ready to start watching Live TV…


How to setup IPTV on MAG with M3U url

Developed by iptvhelpcenter.net

What is MAC address on MAG Box?

MAC, an acronym of Media Access Control address, is a unique feature which identifies the device manufacturers’ registered number and will be usable when the device has to be utilized in network environments.

Each MAG device is specified with a particular MAC address that should be registered in the servers of the IPTV provider.

Privileged IPTV providers give you a dashboard to can edit your IPTV subscription, in the dashboard you can Add the MAC.
And if there is not any dashboard, need to contact the IPTV provider about this case.

If the users want to change their MAG device, use another MAG device, the new MAC address has to be replaced by the old one in the servers. How to set up IPTV on MAG?

Where to find the MAC address

In order to find the MAC address of your MAG box, simply turn the box around and you can find the MAC address on the backside of your device. The Mac address usually starts with 00:1A:79 and the rest of the numbers and characters are exclusive to each box.

Developed by iptvhelpcenter.net

How to update MAG?

Sometimes the best way to fix an issue is to update the MAG box to the latest version of the released firmware. The below instructions will guide you through how to update your MAG box firmware.

How to update the Firmware of the MAG box

Disconnect the MAG box from the internet.
Reset the MAG box.
Wait until you can see the “Page Loading Error”  on the screen.
Plug in the Internet cable into the box.
By selecting the Embedded Portal, the box will be updated with the latest version.
If the automatic update does not start, press the SET button on the remote, select “software update”, press OK, and then press the F1 button.

Some of the MAG devices lose the portal settings after updating the device to the latest version of system software and this will not allow the clients to add any portal addresses to the device.

In this method, we will teach you how to downgrade the system software to the latest version via a USB drive.

How to update MAG via USB

In order to update STB from System settings via a USB:

Step 1: Make sure that your USB drive matches the requirements.

Step 2: Download the required SW image file (image update).
Note. The latest version of the Factory SW image is accessible on the manufacturer’s server: http://update.infomir.com/mag/<model>/imageupdate (<model> – number of STB model). For example, for MAG322: http://update.infomir.com/mag/322/imageupdate

Step 3: Created directory mag<model> in the root of the USB drive and write the “image update” file to this directoryFor instance, for the MAG322 directory name: mag322.

Step 4: Connect the prepared USB drive to STB. You can use any USB connector of STB: both rear or front.

Step 5: Open Settings⇒ System settings ⇒ Software update.

Step 6: In the Software update window set Update method = USB. You can see two new strings:

  • Disk – the name of USB drive;
  • Path – Path to update file on the USB drive.

Step 7: Select Verify (OK) to make sure that STB can detect the “imageupdate” file.

Step 8: If the file is detected and readable successfully you’ll see the Software Update window.

Step 9: In the Software Update window displays descriptions of the firmware versions: the Current version (operating in STB) and the New version (available on a USB drive).

Step 10: Select subsequent operation after comparing the Current and New versions:

  • To reject the update push Exit.
  • To start update push Update (F1).

Step 11: The status of the software update is displayed by the progress bar and comments. To view the log of update user may push the Show log (Info on RC).

Step 12: Wait until the update process is complete. After completing the update, the STB automatically reboots.
Note. Do not turn off STB and plug off the USB drive until the end of the update.

Developed by iptvhelpcenter.net

MAG Box Problems

We usually face some specific issues in MAG boxes.
The 2 prevalent error messages we meet are:

  • STB blocked or Black Screen
  • Page Loading Error
  • Loading bar stuck

In this article, we are going to solve these problems.

How to set up a MAG box?

STB blocked (Black Screen)

STB blocked on MAG happens for various types of reasons. we are going to make a list and explain all of the possible reasons.
Note: Recently in some MAG boxes we have only a Black Screen instead of STB blocked error message.

MAC address didn’t add to the subscription or Removed

For MAG boxes it’s necessary to add the box MAC to the IPTV subscription. What is the MAC address in MAG devices?
Privileged IPTV providers give you a dashboard to can edit your IPTV subscription, in the dashboard you can add the MAC or check if it’s still on a subscription or not.
And if there is not any dashboard, need to contact the IPTV provider about this case.

Adding a wrong MAC address

If you somehow by mistake add the wrong MAC address to your IPTV dashboard, there is a 100% chance you might see this error on your screen. So we highly suggest you double-check every character and number you added to your panel from the back side of your MAG device.

Line expired

If your IPTV subscription is expired, you will face the STB blocked (Black Screen) error on your screen. So head back to your IPTV dashboard and double check if your subscription is expired or not and extend the line if it’s expired.

Line disabled

IPTV providers block (disable) the subscriptions which use in more than allowed devices simultaneously. So should check the line by IPTV service if it has been blocked or not.

ISP blockage

One more reason that STB blocked (Black Screen) error might occur is ISP blockage. In this case, we suggest you contact your Internet Service Provider and ask for further information. You can also try with another internet connection such as a 4G connection from your phone to make sure about this issue.
The last solution for ISP blockage is using a reliable VPN service, but please note that for MAG boxes you need a special router to install VPN on it.

Adding a wrong portal address

Exactly identical to the first reason, if you add the wrong portal address to your MAG box, there is a 100% chance that you might see this error again. Now find out the correct portal address by asking from your IPTV provider and it to your MAG device. How can I change the portal address in the MAG box?

Page Loading Error

Mostly this problem occurs because of a problem in internet connection.

On the Page Loading Error Screen, it will say “Ethernet Link: UP” if all is ok or “DOWN” if the Ethernet port is not connected to the router. In addition, it would be possible that your Internet connection does not work well, so you have to check whether Internet access is available.

How to solve this Issue

Firstly this error usually occurs as a result of the lack of Internet connection to the setup box. you need to be sure that the Ethernet cable between your STB and the router is plugged.

The LAN light on the router port which is connected to the back of your STB has to be lit. Also, check the connection on the back of the setup box itself, there should be 2 lights on the connection itself where the cable is plugged into the setup box, one orange and the other is green.
If either the light on the router or the lights on the STB ports do not lit, there should be a connection issue and it is highly recommended to change the Ethernet cable.

If even after these changes the problem still exists, the next step is to unplug both the router and setup box power cables. After unplugging, plug back the router power cable at first and after two minutes plug in the STB power cable.

If your router is places in one room and your setup box is in another room and connected to the router via the Ethernet line, please check the lights on the sockets. If this is not lighted, the power line has lost its wireless connection to the router and you will need to reboot both the router and then the power line.

Once the light is back, you have to reboot the setup box too. If the light is lit and the STB is still stuck on the loading screen, you need to make sure that the power line has the LAN light on the front.

Loading bar stuck on the MAG box

Sometimes when the users try to switch a loading message appears on the screen. This issue can be tackled by rebooting both the modem and the STB.

If you think need further help, feel free to discuss it with us in the comments section down below.

Developed by iptvhelpcenter.net

Suggestions for Purchase a MAG Box

In this article, we are going to give you some useful information to make the best decision before buying a MAG box.
What is MAG?

Note: The suggestions in this article can be changed by time, so surely will update them in the future.

In the market, there are some model MAG boxes with Android Operating Systems and Powerful Hardware like “MAG 425A”. But most of the IPTV providers do not support these models with Portal System – How to setup IPTV on a MAG device? – and you need to set up them with a M3U file.
How to set up IPTV on MAG 420 with M3U URL?

This is the list of MAG boxes which most of IPTV providers do not support with the Portal System:

MAG 425A        (Android 8.0 – 4K support)
MAG 424Aw3   (Android 7.0 – 4K support)
MAG 420          (Linux 4.4.35 – 4K support)

So if you want to have a MAG box with Portal system features better to forget these models for now.

If you don’t mind having 4K resolution for the box, they are 2 models in the market with better prices.
All IPTV providers support these models with both Portal System and M3U URL:

MAG 322          (Linux 3.3 – 1080p support)
MAG 324          (Linux 3.3 – 1080p support)

In MAG 324w2 you have a WIFI interface.

So our suggestion for the most cost-effective MAG box is MAG 324w2.

They are 2 models which discontinued by Infomir before, MAG351 and MAG 352.
Infomir does not present MAG 351/352 anymore but you can still find them in the market.
All IPTV providers support these models with both Portal System and M3U URL,
They support 4K stream resolution,
Also with 2G RAM, they have one of the most Powerful Hardware in MAG boxes.

Conclusion

Due to the support of both M3U and portal address and improved hardware quality, MAG 351 will be the best MAG box manufactured to date. If you are looking to purchase a new setup box, MAG 351 can be the first choice.
As we mentioned the production of this model stopped by Infomir but can be found in the market yet.

For the second choice, you can buy MAG 324w2.

Comparison of MAG boxes

At the end, we provide a comparison table for some models of  MAG boxes:

Model Support Portal System 4K Support RAM Wifi interface Operating System Price*
MAG 322 ✔ 512 MB Linux 3.3 €66.25
MAG 322w1 ✔ 512 MB ✔ Linux 3.3 €79.00
MAG 324 ✔ 1 GB Linux 3.3 €69.90
MAG 324w2 ✔ 1 GB ✔ Linux 3.3 €88.70
MAG 351** ✔ ✔ 2 GB ✔ Linux 4.1 €149.99
MAG 420 ✔ 512 MB Linux 4.4.35 €71.00
MAG 420w1 ✔ 512 MB ✔ Linux 4.4.35  €74.00
MAG 424Aw3 ✔ 1 GB ✔ Android 7.0  €89.00
MAG 425A ✔ 2 GB ✔ Android 8.0  €96.25

*    Please note the prices are for Feb 2020
**  MAG 351 discontinued by Manufacturer

Developed by iptvhelpcenter.net

How to set Date and Time on MAG device?

Setting up a time and date on your MAG box is an important step toward setting up your IPTV subscription on your MAG box. This will allow the EPG to be displayed properly based on your local time.

How to set up Time and Date on MAG

On your remote control, press “OK” to get the channel list to appear.
Press “Exit” on the remote (it places near the arrows).
Go to “Settings“.
Press  “OK“.
Go to localization and here you can update the time settings.
Go back to Servers and enter “Your IPTV Provider
Once done, it should be updated within 24 hours.

Developed by iptvhelpcenter.net

How to add channels to Favorite list on MAG?

In this tutorial, we are going to show you how to add IPTV channels to your favorites list on a MAG device. The Favorites feature presents STB users with the capability to instantly access pre-selected IPTV channels on the MAG box. What is MAG

How to add channels to favorites

Channels selection to Favorites may be fulfilled from the next:

  • from the channel list of the IPTV channel window;
  • from m3u-playlist on a USB drive or Network resources – its shortcuts are located in Home media.

To add a particular channel of the IPTV playlist window to Favorites:

  • Select the channel.
  • Via pressing the F3 button on the remote control, select the channel – it marks in the list by a star.
  • Go to the next channel and identify it in the same way as explained above.
  • Furthermore, mark all the channels you need to be added in Favorites.
  • When exiting this section, the system reports that the Favorites list has changed.
  • After confirming to save (OK on the remote), the selected channels are permanently added to Favorites.

How to access the Favorites

Added to Favorites channels, become available from Home media.

Developed by iptvhelpcenter.net

What is MAG Portal?

The MAG Stalker Portal

A stalker portal is a link between your MAG device and the IPTV feeds which supplies all the necessary information to get the stream from the IPTV providers to your TV

The MAG Inner Portal

The inner portal is an embedded software installed on the MAG boxes from the beginning when you purchase the box which allows you to add various apps on your box such as Internet browserGamesWeather forecast and so forth. How to setup IPTV on MAG?

You can always switch between the inner portal and outer portal by going to the settings section of your MAG box and click on “Change to Inner portal” or “Change to outer portal” and click on “Ok“. In order to setup IPTV channels on your MAG device, you can use the inner portal and add the portal address which you can get from your IPTV distributor.

Developed by iptvhelpcenter.net

How to use Catch-up on MAG?

In broadcasting live TV channels, the catch-up is the recording of live TV programs to an IPTV provider’s server so that it can be accessed at a later time after the program is finished.

Many of these devices have other methods of time shifting, for example, being able to watch the recorded program from the beginning even if the TV program is not finished. Some of the IPTV providers broadcast time-shifted versions of their content, regularly one hour in the future.

In this tutorial, we are going to show you how to use the time shift or catch-up feature with your MAG device. How to setup IPTV on a MAG device?
As displayed in the below picture, channels that have catch-up available, are marked with a clock next to their names.

Step 1: In order to watch a previously recorded content by using the catch-up feature, click on the right arrow on your remote control to open the TV guide.

Step 2: After opening the TV guide you will see the available content for the catch-up feature with a yellow dot on it as depicted in the below picture.

Step 3: Select the desired content and press OK on your remote control.

Please note, contents that are not marked with a yellow dot are not yet available for using the catch-up feature.

Developed by iptvhelpcenter.net

I have an old TV, can I still access IPTV services?

To do so, you have to attach your TV with an external device called IPTV Media Box or setup box (STB) which will connect your TV to the Internet as well as an IPTV receiver. There exist numerous popular IPTV Media Box in the markets such as Android box, MAG box, Enigma box, Apple TV box, Roku and so forth.

As time passes TVs are becoming smarter and this will prevent the owner of the old TVs from smart features and applications; however, there exist numerous streaming media players which can be connected to the old TV and turn them to the smart ones. Some of these devices include Apple TV, Roku Premier, Amazon FireTV, Nvidia Shield TV, Google Chromecast, and so forth.

Setup boxes

The only solution for turning an old TV into a smart one is by using a setup box. Utilizing a setup box on an old TV will bring you more features and options other than IPTV channels.

Android setup boxes

For example, by using an Android box, you can connect to Google Play Store and download thousands of Android games and play those games on your TV. The best setup box for having both IPTV channels and playing Android games is Nvidia Shield which also comes with a Gamepad or a controller which makes it easier to play Android games.

iOS setup boxes

These setup boxes enable the users to utilize an HDTV to stream video, music, and podcasts as well as downloading apps and games from the App Store. AppleTV is the best option for this operating system and it offers all the features an Android box has to offer, plus, with a remote that adds voice control from Siri, a touchpad, and an accelerometer and gyroscope for gameplay makes this device an even better solution compared to other platforms.

MAG boxes

Infomir’s MAG is by far one the greatest IPTV devices in the world. After 2007, Infomir produces Set-Top Boxes following the brand name MAG. These Set-Top Boxes are multi-functional devices that allow you to quickly organize your media contents and use IPTV services. The latest releases of MAG boxes will have an Android operating system embedded, however, you need to make sure that your IPTV provider supports these new versions.

How to connect a setup box to TV

This is very easy and simple…

  • Put the TV Box in the same room as the TV monitor.
  • Connect your setup box to a power outlet.
  • Connect an HDMI cable from the TV Box to an available HDMI port on the TV.
  • Turn on your TV and switch the input to the appropriate HDMI port.
  • Now connect your setup box to an internet connection via WiFi or Cable.
  • Now turn on your setup box and wait for it to boot up. You can now watch IPTV channels on your OLD TV based on the instructions described above.

Developed by iptvhelpcenter.net

What is MAG?

Infomir’s MAG is one the common IPTV devices in the world. After 2007, Infomir produces Set-Top Boxes following the brand name MAG. These Set-Top Boxes are multi-functional devices that allow you to quickly organize your media contents and use IPTV services.
How to setup IPTV on MAG?

Below are some of the major features represented in all MAG devices:

Android

A brand-new creation of set-top boxes operating the Android OS. A simple to use answer for your IPTV services with a user-friendly interface which is well-known both to the providers and users.
How to setup MAG with m3u url

Premium Hardware

These MAG Set-Top Boxes are implemented with super-powerful hardware that assures great performance while running applications. By supporting high definition contents such as UltraHD, MAG boxes allow you to watch these contents on the highest quality.

Developed by iptvhelpcenter.net

How to record IPTV on MAG Box?

MAG boxes are some of the most powerful streaming media players. IPTV users choose them for their speed, simplicity, and excellent streaming performance. The user interface is simple and responsive, channel switching is quick and you receive all the features required to get the most out of your IPTV service. How to setup IPTV on a MAG device?

These Set-Top Boxes are multi-functional devices that allow you to quickly organize your media contents and use IPTV services. Please note, in order to record on a MAG device, you need to connect a USB stick to your MAG box and record the program on the external storage.

How to record on MAG

Step 1: Start by selecting the channel that you want to record and press the red button on your remote controller.

Step 2: Now press the red button on the program that you want to record and click on “YES“.

Step 3: You can see now that the programs you placed recordings on are now marked with a tiny little red dot as depicted via a red arrow in the below picture.

Step 4: Now in order to access your recorded contents, head back to the main menu and select “RECORDINGS“.

Step 5: You can now click on any recorded program from the list and start the video. You can also delete unwanted recordings by pressing the red button on it.

And that was the entire process of recording TV programs on your MAG box.

Let us know in the comments section below about your opinion and feedback concerning this article and help us improve the quality of our articles. Thank you in advance.

Developed by iptvhelpcenter.net

Android Box

What is Android Box?

It is a mini PC device running the Android operating system which can be used for watching IPTV. There exist various Android TV Box brands including Nvidia Shield, Amazon Fire Box, Xiaomi MI Box, Minix Neo and so forth which equipped with a variety of Android apps.

An Android TV box is generally a TV box running the Android operating system. This is the same operating system as the one appearing on your smartphone, tablet and other devices everywhere in the world.

IPTV on Android Box

There are many applications that you can use to stream IPTV channels on your Android Box, however, IPTV Smarters , GSE Smart IPTV, and Perfect player are the most suitable choices on an Android set-up box. How to connect an Android box to TV?

How to run an Android setup box

Now we are going to show you how to connect a set box to your old TV and turn it into a smart TV.

Connecting the cables

In the beginning, you must connect the HDMI cable. There’s normally one in the box. If not, you can purchase one at an online shop or local store.

Next is the Ethernet cable. This one is arbitrary. You can choose WiFi or connect directly via cable if you want to use the whole bandwidth your internet service provider has to offer, then you need. If you have the opportunity, go with wired Ethernet. If that’s not an alternative, you can still go wireless.

You can use a flat ribbon Ethernet cable. They take up smaller space and you can cover them easier. There’s no differentiation in play, however, we suggest that you at least use a CAT 5 ethernet cable.

The last connection is the simple one. Power cable. Find an outlet and plug it in.

Selecting an Internet network

Before starting with anything else, you must connect your device to the internet. Some companies make you decide how you’re connecting the device when you load up the device for the first time. The minimum required bandwidth for streaming IPTV.

If your device doesn’t make you connect the device to the internet when you first boot up the device, you need to do it manually. Go to the Settings section of your device and click on Network. From here you’ll be able to use Ethernet or Wi-Fi and select your network.

Create a Google account

The first thing you need to do after connecting the box to the internet is to create a Google account and start the process of updating any preinstalled apps and syncing any data you require. You can use the Google Play Store to download tons of different applications and Android games which turns your normal TV into a Smart TV.

Updating your Android box

Downloading updates is complex for every device. It’s normally discovered in an app, but it could be also in the settings section. It just depends on the manufacturer who created the device.

Here are some of the more common places that you can go to update your setup box:

  • In the Settings menu on the About section, there is usually an option for System Upgrade. On the NVIDIA Shield TV, you can also install system upgrades to auto-download when available from this screen.
  • In the All Apps section, you’ll apparently find apps named System Update or Update & Backup which you can use to update the box.

Conclusion

In this article, we tried to explain how you can turn your old TV into a smart TV by using setup boxes and we explained how you can connect an Android box to your Television. If there is anything missing from this article, feel free to discuss it with us in the comments section down below.

Developed by iptvhelpcenter.net

I have an old TV, can I still access IPTV services?

To do so, you have to attach your TV with an external device called IPTV Media Box or setup box (STB) which will connect your TV to the Internet as well as an IPTV receiver. There exist numerous popular IPTV Media Box in the markets such as Android boxMAG box, Enigma box, Apple TV box, Roku and so forth.

As time passes TVs are becoming smarter and this will prevent the owner of the old TVs from smart features and applications; however, there exist numerous streaming media players which can be connected to the old TV and turn them to the smart one. Some of these devices include Apple TV, Roku Premier, Amazon FireTV, Nvidia Shield TV, Google Chromecast and so forth.

Setup boxes

The only solution for turning an old TV into a smart one is by using a setup box. Utilizing a setup box on an old TV will bring you more features and options other than IPTV channels.

Android setup boxes

For example, by using an Android box, you can connect to Google Play Store and download thousands of Android games and play those games on your TV. The best setup box for having both IPTV channels and playing Android games is Nvidia Shield which also comes with a Gamepad or a controller which makes it easier to play android games.

iOS setup boxes

These setup boxes enable the users to utilize an HDTV to stream video, music, and podcasts as well as downloading apps and games from the App Store. AppleTV is the best option for this operating system and it offers all the feature an Android box has to offer, plus, with a remote that adds voice control from Siri, a touchpad, and an accelerometer and gyroscope for gameplay makes this device an even better solution compared to other platforms.

MAG boxes

Infomir’s MAG is by far one the greatest IPTV devices in the world. After 2007, Infomir produces Set-Top Boxes following the brand name MAG. These Set-Top Boxes are multi-functional devices that allow you to quickly organize your media contents and use IPTV services. The latest releases of MAG boxes will have an Android operating system embedded, however, you need to make sure that your IPTV provider supports these new versions.

How to connect a setup box to TV

This is very easy and simple…

  • Put the TV Box in the same room as the TV monitor.
  • Connect your setup box to a power outlet.
  • Connect an HDMI cable from the TV Box to an available HDMI port on the TV.
  • Turn on your TV and switch the input to the appropriate HDMI port.
  • Now connect your setup box to an internet connection via WiFi or Cable.
  • Now turn on your setup box and wait for it to boot up. You can now watch IPTV channels on your OLD TV based on the instructions described above.

Developed by iptvhelpcenter.net

Formuler Box

How to setup IPTV on FormulerZ11 box via MYTV Online 3 app?

Formuler Z boxes are one of the best devices for watching IPTV.
The most important advantage of FormulerZ boxes is supporting both the MAC base Portal System and the M3U base Playlist.
After successful Formuler Z8 and Formuler Z10 boxes now we have Formuler Z11 set up boxes.
The Formuler Z11 is a more advanced IPTV set-top box than the Formuler Z10. Here are some of the key differences between the two devices:
Processor: The Formuler Z11 comes with a faster processor than the Formuler Z10. The Z11 is equipped with a quad-core processor, while the Z10 has a dual-core processor.
RAM: The Formuler Z11 has more RAM than the Formuler Z10. The Z11 has 2GB of RAM, while the Z10 has 1GB of RAM.
Storage: The Formuler Z11 has more storage than the Formuler Z10. The Z11 comes with 16GB of internal storage, while the Z10 has 8GB of internal storage.
Connectivity: The Formuler Z11 has more connectivity options than the Formuler Z10. The Z11 supports Gigabit Ethernet, while the Z10 supports Fast Ethernet. The Z11 also comes with built-in dual-band Wi-Fi, while the Z10 has single-band Wi-Fi.
HDR: The Formuler Z11 supports HDR (High Dynamic Range), which provides a wider range of colors and contrast than the Formuler Z10.

Formuler Z box 11

How to bring IPTV channels to your FormulerZ11

This tutorial is useful for all models of Formuler boxes that have MYTVonline3.
Note: Please consider in the new generation of Formuler boxes like Formuler Z11, the MAC address which you need to give the IPTV provider is the MAC ID of the box which starts with 00:1E:B8:XX:XX:XX . In the old model like Formuler Z7 and Z8, you need to change this MAC ID to a MAC address that starts with 00:1A:79:XX:XX:XX .
Please click here to learn more about how to set up Forumler box Z7.

Formuler Z11 box

Step 1: The default application for IPTV on Formuler Z11 is “MYTV Online 3”.
Open this app.

Step 2: Go to Menu then Content Manager and click on “Source Manager“.

How to setup IPTV on FormulerZ11 box via MYTV Online 3 app

Step 3: If you want to set up your formuler Z11 box with the portal system, click on “+Add” and then “Add Portal”.
Here you have an ID of your box, click on the eye icon to see the full MAC ID. you need to send this MAC ID to your IPTV provider and they will add the MAC to the system and give you the Portal URL. Then you need to add the Portal URL here on this page. Let the Login required off, in the last step click on “Connect” to load the channels.

How to setup IPTV on FormulerZ11 box via MYTV Online 3 app

If you want to set up your formuler Z11 box with the M3U system, after clicking on “+Add” choose “Add m3u Playlist”.
Enter the M3U URL which you receive from your IPTV provider in the “Playlist URL”. if you enter M3U with options do not need to add VOD URL and EPG URL, leave them blank. EPG and Movies will load automatically.

How to setup IPTV on FormulerZ11 box via MYTV Online 3 app

In the last step click and Connect and Enjoy!

Developed by iptvhelpcenter.net

How to setup IPTV on FormulerZ8 box via MYTV Online 2 app?

FormulerZ boxes are one of the best devices for watching IPTV.
The most important advantage of FormulerZ boxes is supporting both the MAC base Portal System and M3U base Playlist.

FormulerZ8 is the last version of Formuler boxes with MYTV Online 2 application which supports 4K Ultra HD streaming,
In this tutorial, we are going to show you how to bring IPTV channels to your MYTV Online 2 on FormulerZ8 and Formuler Z10.

How to bring IPTV channels to your FormulerZ8

This tutorial can be used for all models of formuler boxes including FormulerZ8+ and Formuler Z10 .

Step 1: Open the exclusive application for watching IPTV in Formuler boxes “MYTV Online 2”.
If you don’t have this application on your device you can download it from the Google Play store.

Step 2:  You can see the box’s MAC in the top right of this page.
Please note, this MAC address must be given to your IPTV provider (Some progressive IPTV providers present you a dashboard to manage IPTV settings, you can Add a MAC address to your subscription in the dashboard)

Here you can see the two options, select “Add Portal” to set the device as a MAC base device like MAG boxes.

Step 3: Enter Portal Nickname (Example: MYIPTV).
Enter the IPTV Portal URL you get from your IPTV provider and click on “CONNECT”. You can ask for portal URL from your IPTV service provider.

Step 4: Successful Connection! You receive all channels associated with your subscription
Please note, this might take a little time…

How to setup FormulerZ8 with MYTV Online 2 using M3U Url

Step 1: After opening the MYTV online application you have two options.
To set up FormulerZ8 using the M3U URL you need to select “Add Playlist” here.

Step 2: Enter Playlist Nickname (Example: MYIPTV).

Enter the IPTV M3U URL you get from your IPTV provider and click on “CONNECT”. (Some progressive IPTV providers present you a dashboard to manage IPTV settings, you can access your M3U Url in the dashboard)
Note: If you add M3U with Options Url here, Do not need to Add VOD or EPG URL anymore. For more information please contact your IPTV provider.

Step 3: Now Everything is ready and you can start watching Live TV.
Please note, this might take a little time…

Developed by iptvhelpcenter.net

How to setup IPTV on Formuler box via MYTV Online app?

In this tutorial, we are going to show you how to bring IPTV channels to your MYTV Online on FormulerZ.

The FormulerZ is the latest mixture of an IPTV receiver and an Android media player. The FormulerZ is Android-based, so it can play the newest versions of all available apps on your device.

An important tip before starting the tutorial:

The FormulerZ Boxes have both Mac and ID, you can find the MAC address in the catalog of the device or in the back of the box.

It is a number like this MAC: 00:1E:B8:XX:XX:XX , to change it to box ID you need to replace 6 first digit and make it like this ID: 00:1A:79:XX:XX:XX .

How to bring IPTV channels to your FormulerZ

This tutorial can be used for all models of formuler boxes includes FormulerZ1 &  Formuler Z7+.

Step 1: Start by downloading the MyTVOnline app from the Google Play store and then open MYTV Online.

Step 2:  Now click on “Edit Service” and then click “Edit“.

Note: Be sure you register with your right ID Address (Do not use the MAC address). You can check important tip for more information.
Please note, this Mac address must be given to your IPTV provider.
Add the ID as MAG and use the MAG portal.

Step 3: Enter “Service Nickname” (Example: IPTVHELPCENTER) and click on “OK“.

Step 4: Enter IPTV Server URL (STB MAG Emulator/ Portal URL) you get from your IPTV provider and click on “OK”. You can ask for a portal URL from your IPTV service provider.

Step 5: Enter Username and Password is NOT necessary.

Step 6: Click on “OK” and proceed to the next step. Please note, this might take a little time.

Step 7: Connecting to IPTV Server (with your registered data) is in progress now.

Step 8: Successful Connection! You receive all channels associated with your account.

Now Everything is ready and you can start watching Live TV.

Conclusion

There you have it. MyTV Online is a great addition to Enigma2-based devices and goes great along with Xtream PluginTV on your Enigma2 device. For adding extra content and improving the quality of this guide, feel free to submit a comment down below and this helps out. Thank you.

Developed by iptvhelpcenter.net

TVIP Box

How to setup IPTV on TVIP Box?

The TVIP Box console meets all modern requirements of a multimedia device, including the support of streaming media, video on demand (VOD), playback of digital channels in high quality, as well as access to OTT content (YouTube, Picasa, online entertainment, weather forecast, social networking, and others) and even includes a Web browser. What is internet streaming?

TVIP is very similar to the MAG boxes and somehow emulates the MAG box-embedded software. What is MAG?

How to add IPTV channels to TVIP Box (New version)

If you have new TVIP boxes like 605, or 615 you can use this tutorial, but if your box is an older version like 410 you need to update the TVIP box operating system or Use the tutorial for old versions.

Step 1: After running the TVIP box and setting the primary settings like language and time, Start from the main menu go down to see “Setting” and click on “TV” as depicted in the below picture.

Step 2: Now change the Content source to “Web portal” and click on “Setup Web portal“.

Step 3: First change the API Mode to “MAG” on the “Portal URL:” Enter your portal server address (you can ask for this info from your IPTV distributor) and click on “Apply” and “Restart“.

Note: If you don’t have “MAG” API in your setting use “GSTB” API.

Now you must insert your device Mac address to your IPTV dashboard or simply give it to your IPTV distributor. What is Mac’s address?
The progressive IPTV providers give you a dashboard on which you can add MAC to your line yourself on the dashboard.

Note: You can find the TVIP box MAC address on the back of the box.

Step 4: After restarting the box in the main menu click on “Watch TV“, you must wait for the portal to load your playlist. This might take a few minutes.

Step 5: As you can see the channels will pop up automatically and you can select any desired channel and start the streaming.

How to add IPTV channels to TVIP Box using M3U URL

In Step 2 of the above tutorial change the Content source to “M3U-playlist” and click on “Setup M3U-playlist“.

Enter the M3U URL that you receive from your IPTV provider here and click on “Apply” and “Restart“.

How to add IPTV channels to TVIP Box (Old version)

Step 1: Start from the main menu and select “Setting” as depicted in the below picture.

Step 2: Now on the right menu select the “TV” icon and then on the right side change the Content source to “Web portal” and click on “Setup Web portal

Step 3: Now on the “Portal URL:” enter your portal server address (you can ask for this info from your IPTV distributor) and click on “Apply“.

Now you must insert your device Mac address to your IPTV dashboard or simply give it to your IPTV distributor. What is Mac address?
The progressive IPTV providers give you a dashboard in which you can add MAC to your line yourself on the dashboard.

Note: You can find the TVIP box MAC address on the back of the box.

Step 4: After adding your portal server address, you must wait for the portal to load your playlist. This might take a few minutes.

Step 5: As you can see the channels will pop up automatically and you can select any desired channel and start the streaming.

Features of TVIP Box

  • Under the operation of the middle product TVIP
  • Under the operation of the IPTV middle Product portal
  • Under the company that middle Product ‘Stalker’ purse
  • Clients Custom Middle Product over c + + API
  • Without a middle Product with easy dress M3U playlists
  • Media Player with USB/LAN Media Supported playback
  • Customers Custom Middle Product via HTML5/JS API
  • Customers Custom Android APK
  • Windows sharing support (Samba)
  • External USB and SD card support
  • Support for FileSystems: FAT16/32, NTFS (read), NFS, ext2, ext3
  • Streaming Media protocol support RTSP, RTP, UDP, IGMP, HTTP
  • Timeshift using a USB drive or SD card
  • M3U playlist support
  • TV Guide Support for EPG: Xmltv and JTV
  • AIR MOUSE support

Powerful CPU

TVIP media centers always include modern SoC with powerful multi-core CPUs, that allow your customers to enjoy all modern multimedia applications, that not only developed today but that will be developed in the next couple of years.

USB support

All TVIP S-Box carry the USB-host connection.
You can connect flash drives, HDD, keyboards, and wireless remotes and play video or music directly from an external hard drive or flash card. This will be a great extension to your service.

TVIP S-BOX supports AVI, MKV, MP4, and many other media formats. It also supports multichannel audio and subtitles.

High-quality WiFi

These are diverse options for nearly all media centers:

  • WiFi 2,4 GHz
  • WiFi 2,4/5 GHz

Learning remote control

Easy and reliable. Strong plastic and soft rubber buttons.

Setup is fast and simple. Remote supports learning functions for TV control. The learning setup does not reset after the battery change.

Developed by iptvhelpcenter.net

How to Factory Reset a TVIP box?

TVIP boxes are devices you can use to watch IPTV, you can name them the Russian model made of MAG boxes. TVIP boxes have their own operating system with different MAC address format which starts with 10:27:BE:XX:XX:XX.
In another tutorial we explained how can you setup different model of TVIP boxes.
How to setup IPTV on TVIP Box?

TVIP Box

Sometimes you do everything and you can not solve the problem with your TVIP box and the only solution remain is Factory Reset the box. In this article we will show how you can reset different model of TVIP boxes. It’s really simple!

But before we start the guide please check the remote control of your TVIP box. In many cases we saw that the problem was the TVIP remote control (and not the box).
How to fix TVIP remote control problem?

How to reset factory different model of TVIP boxes?

We have two different methods to factory reset a TVIP box. For TVIP boxes with firmware version 3.8.6 or more like TVIP 410, 412, 605 and … , and for TVIP boxes with firmware version less than 3.8.6:

How to Factory Reset TVIP 410, 412 and 605?

Here we will learn how can reset TVIP boxes with firmware 3.8.6 or more. On your remote control first press “S.INFO” then press “4” then “9” and at the end again press “S.INFO”. After a second you will see the message on box ” Do you want to make factory reset that will clear ALL setting? “, press OK and confirm it. Done!

How to Factory Reset a TVIP box?

You can use this method for all TVIP boxes after 410 model like TVIP 412, 415, 501, 605, 615 and 705.

How to Factory Reset older models of TVIP boxes?

There is some kind of OLD TVIP boxes model 110, with firmware less than 3.6.8 . The factory reset method on them is different, You need to Press and Hold the “Power” button on remote control for 5 seconds and then press OK after you see the message on box.

Now you know how can factory reset different models of TVIP boxes.
Please let us know in comments in you need any further question.

Developed by iptvhelpcenter.net

How to fix TVIP remote control problem?

TVIP boxes are using to watch IPTV contents, they are almost same as MAG boxes but with different software.
What is TVIP and how to setup it?

A common problem on TVIP boxes is that you may see the remote control of your box does not work. In this article we will help you to fix TVIP remote control which is not working.

Before starting please do a test to make sure if it’s battery problem or not. Click some buttons on remote control and check if the red light on remote blink or not.
If the red light is NOT blinking so the problem is the remote control battery, change the batteries! (if still same no light after changing the battery the remote control is broken and you need to buy a new one).
If the light blink and the remote does not work then the problem is the remote control IR (Infra Red) problem. You can fix it by doing the below steps.

How to fix the TVIP IR remote issue?

Step 1: Press “Setting” (left side of S.INFO) and “Recall” (left side of “0”) at the same time.

How to fix TVIP remote control problem?

Step 2: Point the remote to the box then press and hold the “S.INFO” button for 10 seconds.
This process will change the IP remote code page. After 10 seconds you will see the message that “IR remote code page was changed”

How to fix TVIP remote control problem?

Now the TVIP remote control recovered!

Please leave a comment if you need any more help with TVIP remote control.

Developed by iptvhelpcenter.net

Other boxes

How to Setup IPTV on Enigma 2 via Autoscript?

Enigma2 is an open source software embedded on all the Linux-based receivers such as VU+ or Dreambox. Enigma2 offers a lot of features including Auto-Bouquets, 7 Days EPG (Electronic Program Guide), and Picons (Channel Icons).

All older Vu+ hardware set-top boxes are MIPS-powered, newer ones are all ARM-powered and use Enigma2 image-based software as firmware. Its firmware is officially user-upgradable since it is a Linux-based computer, as opposed to third-party “patching” of alternate receivers. Firmware is based on Enigma 2, which was originally designed for Dreambox by Dream Multimedia.

How to add IPTV channels to Enigma2 via auto script

Step 1: Start by downloading the necessary items. DCC_E2 (Dreambox Control Center for Enigma2). You must connect to your Enigma box using Dreambox Control Center E2 and click on “Telenet“. But first, you must find the IP address of your enigma2 box. We will discuss this further ahead in this article.

Step 2: To connect, we need to know the box IP address, username, and password (username and password usually is root/root). Now about the IP, click Menu button on the remote controller. Go to Setting then Network Settings. You should see something like the below image:

Step 3: Once connected to your box via Dreambox Control Center, it`s time to execute the Autoscript command which should be provided by your IPTV provider. These scripts can be given in two versions:

  • – OE1.6 version which uses Python 2.6: It is advised to use this version on non-Dreambox receivers.
  • – OE2.0 version which uses Python 2.7: It is advised to use this version on Dreambox receivers.

So for our Dreambox of this example the command line should be like this:

wget -O /etc/enigma2/iptv.sh "http://tv.yourdns.com/get.php?username=your-line-username&password=your-line-password&type=enigma216_script&output=ts" && chmod 777 /etc/enigma2/iptv.sh && /etc/enigma2/iptv.sh

Copy/paste this command line on Telnet Terminal and hit enter.

Step 4: We suggest everyone to reboot the device once you execute the Autoscript command. To reboot the device just write “reboot” on Telnet terminal.

Step 5: After the Reboot, you will see on Bouquet list a new Group called “IPTV”.

Let us know in the comments section below about your opinion and feedback concerning this article. Thank you in advance.

Developed by iptvhelpcenter.net

How to setup IPTV on Openbox?

Openbox has been one of the most popular boxes used over the years as it is affordable, simple to use, and straightforward particularly if you are a CCCam user. Now as IPTV is ruling the market, some of the open box users have no choice except running the IPTV service on this setup box. What is IPTV?

Caution: RAM is something that IPTV relies on as IPTV players buffer the video first and then plays it. Openbox v8s has moderate ram and CPU, therefore after switching channels, or sometimes without any reasons, Openbox may crash. We just want you to drop your expectations while using IPTV on your Openbox IPTV Player.

The well known IPTV Player app on Openbox v8s is called WebTV. You just need to import an m3u file using USB flash drive onto your Openbox v8s and the job is finished, but there are two ways that you can do this setup. The first method is a common way, uploading the file from the WebTV app menu. When that method doesn’t work or you don’t have the “Read By USB” option on WebTV App page, the m3u file must be uploaded through Upgrade page located on Tools menu of Openbox. What is M3U?

Recommendation: We suggest you rename the m3u file of your m3u line into WebTV.m3u meaning if your m3u file is like “name.m3u” you simply change “name” to “WebTV” and leave the format be as m3u. The WebTV app reads m3u files with WebTV.m3u name properly.

If you have any problems viewing the Channels we recommended that you restart your Openbox and Wi-Fi Router.

How to add IPTV channels to Openbox

Step 1: Follow these tasks:
1-Connect the USB containing the Web.m3u file
2-Open Menu
3-Move right all the way to “Multimedia
4-From the list choose “WebTV

Step 2: If there are channels already on that list, make sure that empty by pressing the green button: Del All. Now press the yellow button to “Read By USB” then the channels will appear.

Step 3: If you don’t have the yellow option ” Read by USB”, go back to the main menu and select “Tools”.

Step 4: Now select “Upgrade By USB”.

Step 5: On the next page, change Upgrade Mode to “Misc Files” and from the bottom of the list choose “Select & Upgrade”. Now press OK on it.

Step 6: From the window that pops up, select “WebTV.m3u (Web Stream)” and you must make sure a green tik appears on the right side. Afterward, press the yellow button to Upgrade.

After the process is done, you will see a message saying “Upgrade Finished. Press Info Key for Result”. Now press exit twice to head back to the main menu and from Multimedia open WebTV app and the channels will appear on the list.

Feel free to submit your feedback and questions regarding this article in the comment section down below and help us improve the quality of our articles. Thank you.

The features of Openbox

  • Dual-Core CPU, 600 MHz MIPS Processor
  • DDR III 256M, ROM 400M, Serial Flash 8M
  • DVB S2 demodulator
  • Fully compliant MPEG-4 H.264/AVC Main Profile Level 3 & High Profile Level 4.1;
  • MPEG-2 MP@HL & MP@ML; MPEG-1 Layer I & II & III, Digital Audio (AC3);
  • SCPC & MCPC receivable from C/Ku band satellites;
  • Multiple LNB-Switching control (supports DiSEqC1.0/1.1/unicable/1.2/1.3 (USALS) supported)
  • NIT search supported;
  • Support MPEG-5;
  • Support multi-lingual DVB subtitle and teletext;
  • Automatic and manual channel scan options;
  • Automatic service scan
  • Channel-change time < 1 second
  • OSD in many languages and skin-support
  • Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish,
  • Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech, selectable

Developed by iptvhelpcenter.net

What is Enigma Firmware Image?

Enigma2 is an open source software that is compatible with the Linux operating system. It has an easy-to-use GUI (Graphical User Interface) which provides a lot of features including Auto-Bouquets, 7 Days EPG (Electronic Program Guide), and Picons (Channel Icons).

All older Vu+ hardware set-top boxes are MIPS-powered, newer ones are all ARM-powered and use Enigma2 image-based software as firmware. Its firmware is officially user-upgradable since it is a Linux-based computer, as opposed to third-party “patching” of alternate receivers. Firmware is based on Enigma 2, which was originally designed for Dreambox by Dream Multimedia.

How to add IPTV channels to Enigma2

Due to the lesser popularity among applications such as Kodi or Perfect Player, or, devices such a MAG and Android setup boxes, adding IPTV channels to Enigma2 was a little tricky in the past, however, with the appearance of xtream TV plugin on Enigma2 things get a lot simpler and you can install IPTV channels in just a matter of minutes.

Developed by iptvhelpcenter.net

How to setup IPTV on iBRAVEBOX F10S?

In this tutorial, we are going to show you how to bring IPTV channels to your iBravebox F10S receiver. This device works very similar to MAG boxes and installing IPTV on it is identical to MAG devices. What is MAG? 

How to bring IPTV channels to your iBravebox

Step 1: Start by clicking on the “Multimedia” tab and selecting “Extreme IPTV“.

Step 2: Now click on “Server“.

Step 3: Now enter the portal address provided by your IPTV distributor and click on “OK “. You must enter a MAG portal address. What is a Stalker Portal in MAG?

Step 4: Now enter the port number. You can ask this from your IPTV provider, it usually is 8080 or 8181.

Step 5: Now proceed to the plugins tab from the main menu and click on “System Information“. Now insert the IPTV MAC into your IPTV dashboard and head back to the Extreme IPTV section.

Step 6: Now click on “Start Download” and from now on you can start watching the channels.

For adding extra content and improving the quality of this guide, feel free to submit a comment down below and help us out. Thank you.

Developed by iptvhelpcenter.net

How to Setup IPTV on Enigma 2 via XtreamTV plugin?

In this tutorial, we are going to show you how to bring IPTV channels to your Enigma2 device and explain a few aspects of it. Please note, that you must use a Computer for this guide.

How to add IPTV channels to Enigma2 using the XtreamTV plugin

Step 1: Start by downloading the necessary items. Download the XtreamTV Plugins or this new version of Plugins New XtreamTV Plugins version 2.3 and DCC_E2 (Dreambox Control Center for Enigma2), extract both of the files, and open DCC_E2. After opening the DCC_E2, enter your Enigma 2 IP address and in the login section, you can use the word “Root” for both username and password. Now click on “reconnect“.

Note: You can find the IP address of your device under Menu>Information>Network.

Step 2: After connecting to your box successfully go to the “FTP” section and proceed to this path “/var/temp/”. In the right side navigate to where you have saved the XtreamTV Plugins and move it to the temp folder.

Information about which XtreamTV Plugin version you need to install in your box:

  • Mips32el is applied to the most boxes. For example VU zero, Vu+ Duo, Zgemma, and often above openpli 4 boxes or new images.
  • Mipsel is applied to old boxes such as DM800 clones with old openpli 2.1.
  • Sh4 is applied to boxes similar to spark.
  • Armv7a is applied to new boxes like Vu+ 4k and gigablue sf4008.

Step 3: Now proceed to “Telnet” section and paste the following scripts and press “Enter“.

  • opkg install /tmp/XtreamTV_0.0.1_armv7a.ipk
  • opkg install /tmp/XtreamTV_0.0.1_mips32el.ipk
  • opkg install /tmp/XtreamTV_0.0.1_mipsel.ipk
  • opkg install /tmp/XtreamTV_0.0.1_sh4.ipk

Step 4: After installing the plugin as the final step, you must provide your XtreamTV Plugin ID(Mac address) to your IPTV distributor or add it yourself to your Dashboard.

Note: You can find the XtreamTV Plugin ID after you enter the plugin with your Enigma2 device under “Device Details“.

An overview of Enigma2

Image file

Is primarily an OS (Operating System) version which you store on the box.

  • For instance Enigma 2, there would be a variety of options e.g. Open ARP.
  • Every version will come with many features and equal levels of stability.

Skins

  • Measures the ‘look and style’ of the lists and menus.
  • It is possible to adjust this by downloading other skins.

Bouquets

  • A pre-set menu of how channels are arranged and listed. For example, movie, news…
  • It causes finding a channel much simpler and the list is always updated automatically.

Picons

  • These are channel logos which resemble close to the channel title.
  • They are automatically arranged with the Bouquets and will make finding a channel very easier.

Plugins

  • These are add-ons which add extra functionality to the device.

Where do I get a Plugin?

  • These are accessible freely on the internet. For example XtreamTV plugin.
  • Via purchasing a box which is pre-configured with the necessary helpful plugins previously installed on it.

Let us know in the comments section below about your opinion and feedback concerning this article. Thank you in advance.

Developed by iptvhelpcenter.net

I have an old TV, can I still access IPTV services?

To do so, you have to attach your TV to an external device called an IPTV Media Box or setup box (STB) which will connect your TV to the Internet as well as an IPTV receiver. There exist numerous popular IPTV Media boxes in the markets such as Android boxesMAG boxes, Enigma boxes, Apple TV boxes, Roku, and so forth.

As time passes TVs are becoming smarter and this will prevent the owner of the old TVs from smart features and applications; however, there exist numerous streaming media players which can be connected to the old TVs and turn them to the smart one. Some of these devices include Apple TV, Roku Premier, Amazon FireTV, Nvidia Shield TV, Google Chromecast, and so forth.

Setup boxes

The only solution for turning an old TV into a smart one is by using a setup box. Utilizing a setup box on an old TV will bring you more features and options other than IPTV channels.

Android setup boxes

For example, by using an Android box, you can connect to Google Play Store and download thousands of Android games, and play those games on your TV. The best setup box for having both IPTV channels and playing Android games is Nvidia Shield which also comes with a Gamepad or a controller which makes it easier to play Android games.

iOS setup boxes

These setup boxes enable the users to utilize an HDTV to stream video, music, and podcasts as well as downloading apps and games from the App Store. AppleTV is the best option for this operating system and it offers all the features an Android box has to offer, plus, with a remote that adds voice control from Siri, a touchpad, and an accelerometer and gyroscope for gameplay makes this device an even better solution compared to other platforms.

MAG boxes

Infomir’s MAG is by far one the greatest IPTV devices in the world. After 2007, Infomir produced Set-Top Boxes following the brand name MAG. These Set-Top Boxes are multi-functional devices that allow you to quickly organize your media contents and use IPTV services. The latest releases of MAG boxes will have an Android operating system embedded, however, you need to make sure that your IPTV provider supports these new versions.

How to connect a setup box to TV

This is very easy and simple…

  • Put the TV Box in the same room as the TV monitor.
  • Connect your setup box to a power outlet.
  • Connect an HDMI cable from the TV Box to an available HDMI port on the TV.
  • Turn on your TV and switch the input to the appropriate HDMI port.
  • Now connect your setup box to an internet connection via WiFi or Cable.
  • Now turn on your setup box and wait for it to boot up. You can now watch IPTV channels on your OLD TV based on the instructions described above.

Developed by iptvhelpcenter.net

What is Miracle box?

Miracle Box is a strong media device that attaches to your Broadband Internet Router to give you a large selection of fully unrestricted streaming entertainment. All content is streamed without advertising or limitation including the most up to date Movies and TV Shows as well as an immense range of Music and Radio. What is IPTV?

When viewing your streaming Movies, TV Shows or YouTube Videos, Miracle Box effortlessly gives them in whatever resolution they are available in. This means that if an HD Movie or TV show is available, Miracle Box is able to stream that on your Large screen TV in full glorious HD.

This also affects your Music, Home Videos & Pictures.​ Miracle Box is a modern robust minicomputer based on the Android operating system that has been created especially to deliver streaming media content. Miracle Box has been further improved by a custom-built interface. All you need is wifi set up, and it’s is so easy a child can do it.​ Softwares you need for watching IPTV

Features

  • S812 Amologic processor
  • Standard Remote included
  • RAM 2GB DDR3, 16GB Nand Flash,
  • 10/100M LAN, 802.11b/g/n – Dual Band Wi-Fi (2.4GHz/5.8GHz)
  • Octa-Core Mali-450 GPU
  • Support 4K H.265 Video
  • Decoding and Output
  • All New Aluminum Housing Metal Mould and Low-noise for Cooling.
  • MCU Power ON/OFF by Remote Control and Button
  • Professional and Fashionable UI theme with Good User
  • Experience
  • Optimization for More Popular Streaming Channels
  • Internal 2.5 In. SATA HDD For Option.

Developed by iptvhelpcenter.net

IPTV applications

Android

How to setup IPTV on IPTV Smarters Pro?

IPTV Smarters Pro is one of the most user-friendly IPTV applications that provides your esteemed customers the facility to watch Live TV, VOD, Series, Catch-up, and Multi-Screen on their Android and iOS Devices (SmartphonesSmart TVsAndroid Boxes, etc).

One of the most interesting features of IPTV Smarters is Catch-up.
They are not many applications which provide Catch-up, before we only had this feature in MAG boxes.

Here is the list of devices you can use for IPTV Smartes Pro:

  • Android Smartphones
  • iOS Smartphones
  • Smart TVs
  • Android Boxes
  • Apple TV
  • Computer (both Windows and MacBooks)
  • Firestick

IPTV Smarters is one the best options to watch IPTV on the above devices.
Another choice can be the GSE Smart IPTV app.
How to setup IPTV on GSE?

Where can I download IPTV Smarters Pro?

The best and safest source to download the IPTV Smarters Pro app is the IPTV Smarters website, you can download the download link of the app for different devices here:
https://www.iptvsmarters.com/#downloads

But we put the guide on how you can download and install IPTV Smarters Pro for different devices here, to access it easier and faster:

APK file for Android devices

For you Android device like an Android SmartphoneAndroid box or a Smart TV with Android OS you can download the APK file IPTV Smarters Pro here directly:
https://www.iptvsmarters.com/smarters.apk

Samsung Smart TV

On the remote of your Samsung Smart TV you have a Smart HUB button, click on it and search for IPTV Smarters Pro to find the app. Version 1.0.4 is compatible with Samsung Smart TVs.

LG Smart TV

On the remote of your LG Smart TV click on Home Button and go to LG Content Store, you can search for IPTV Smarters Pro here and install it.
Version 1.0.8 is compatible with LG Smart TVs.

Google play store

Unfortunately, Google play removed the app from the store for now, if they add it again we will put a link here.

iPhone and Apple store

You can download IPTV Smarters Pro for your iPhoneApple TV, or any other iOS device here in Apple store:
https://apps.apple.com/in/app/smarters-player-lite/id1628995509

Computer (Windows or Mac)

Here is the installation for different operating systems on the computer.
EXE file for Windows:
https://www.iptvsmarters.com/download/?download=windows_app

DMG file for Macbook:
https://www.iptvsmarters.com/download/?download=mac

Firestick

First, you need to download the Downloader app for Firestick (you can simply search for it in youtube how install) and IPTV Smarters Pro APK file from here.
Then Go to settings of Firestick and follow this path: My Fire TV -> Developer Options -> Install from unknown apps -> Click Downloader to change the status to ON.
Open the downloader app and put the complete APK link on the downloader and then install the app.

How to add IPTV channels to the IPTV Smarters Pro app

You can add IPTV channels to IPTV Smarters in two methods:

  1. Setup via Xtream Codes API
  2. Setup via Playlist

We recommend setup via Xtream Codes API because you will have the Catchup feature this way and also do not need to add any EPG URL (it will load automatically).

Setup IPTV Smarters via Xtream Codes API

Step 1: Install the app on your device from here.

Step 2: Open the app once downloaded and click on “Add user” then click on “Log in with Xtream Codes API“.

Step 3: In this step, in the first box, select any name you want for example “IPTV Xtream”. On the second and third boxes, enter the “Username” and the “Password” of your M3U line and the server URL which can also be found on your M3U line.
The progressive IPTV providers give you a dashboard in which you can access your M3U URL in the dashboard.
How to find Server Address, Username, and Password?
Please note Server URL is different for Samsung and LG Smart TVs

Now Click on “ADD USER” to proceed to the next section.

Step 4: Wait some seconds.

Step 5: Now click on the “Live TV” icon as depicted in the image via a red arrow.

Step 6: Now you must select the channel group that you want to watch and proceed to the next section.

Step 7: Now you must click on the channel name and then double-click on the small screen to turn into full screen as the final step.

Step 8: To add EPG no need to add any EPG URL, Just click on “Install EPG” .

LG and Samsung Smart TV’s

For adding channels to your IPTV Smarters app on your LG or Samsung TV you need to use a URL which is: http://smarters.link 
You must also insert the username and password which you can find on your M3U link or you can simply ask from your IPTV provider.

Setup IPTV Smarters via Playlist

Step 1: Install the app on your device from here.

Step 2: Open the app once downloaded and click on “Add user” then click on “Login with Playlist“.

Step 3: In this step, in the first box, select any name you want for example “IPTV Playlist”.
Select “M3U URL” and enter the M3U URL which you get from your IPTV provider.
The progressive IPTV providers give you a dashboard which you can access your M3U URL in the dashboard.

Step 4: To add EPG click on “Install EPG”  and enter the EPG url.

Step 5: Now click on the “Live TV” icon, select the channels group then the channel you want to watch.

Enjoy!

IPTV Smarters features

  • Live, Movies, Series & TV
  • Catchup Streaming
  • Record the program
  • Multi-Screen; you can watch up to 4 channels in same time
  • Support: EPG
  • Parental Control Integrated for each category
  • Built-in powerful player
  • Support: Playing with External Players
  • Attractive & Impressive Layout and More User-Friendly
  • Support: Dynamic language switching

We tried to explain two methods for having IPTV channels in IPTV Smarters in this article.

Please feel free to discuss it with us in the comment section down below.

Developed by iptvhelpcenter.net

How to setup IPTV on TiviMate IPTV Player?

TiviMate IPTV Player is an Android-based application that can be used to watch IPTV. It supports both Remote playlists and the Xtream codes system.
Tivimate is a common app on Firestick to stream IPTV channels.

TiviMate IPTV Player

Here we are going to check how can we add IPTV channels on TiviMate IPTV Player via Xtream codes.
At the end of the article, we will review some useful features of the app like Catch-up, Recording, Subtitles, etc.

Setup Tivimate IPTV Player via Xtream Codes API

Step 1: First of all download and install the app from here:
https://play.google.com/store/apps/details?id=ar.tvplayer.tv

Step 2: After open Tivimate click on “ADD PLAYLIST“.

How to setup IPTV on TiviMate IPTV Player

Step 3: Click on “Xtream Codes login” and then Next.

How to setup IPTV on TiviMate IPTV Player

Step 4: In this step, you need to add the Server addressUsername, and Password which can be found on your M3U URL.
The progressive IPTV providers give you a dashboard in which you can access your M3U URL in the dashboard.
How to find Server Address, Username, and Password?

If you want to have VODs too, mark “Include VOD”.

How to setup IPTV on TiviMate IPTV Player

Go on and the channels will appear after a while.

Features on Tivimate IPTV Player

You access many different useful features on Tivimate, we are listing some of them:

• Modern user interface designed for big screens
• EPG – Scheduled TV guide update
• Auto-start on Boot
• Favorite channels
• Picture-in-Picture
• Catch-up
• Record

After you open the channel you can see this view, you can access EPG by clicking on “TV guide“.

How to setup IPTV on TiviMate IPTV Player

By holding the “OK” button for 2 seconds you can see the setting menu, here you can see many features like Recording.

How to setup IPTV on TiviMate IPTV Player

Scroll right a little and you will see other options like subtitle enable “CC” or “Add to Favorites”.

How to setup IPTV on TiviMate IPTV Player

At the end right click on “Setting” to see more options.

How to setup IPTV on TiviMate IPTV Player
How to setup IPTV on TiviMate IPTV Player

Please feel free to discuss it with us in the comment section down below.

Developed by iptvhelpcenter.net

Softwares you need for watching IPTV

According to the Operating System of your device, you can use these kinds of software/apps: VLC media player (Windows Microsoft-Linux-Macintosh OS-Android), Perfect Player (Android), KODI, SIPTV (Smart TVs), and Enigma2 (Linux) MAG box, gaming consoles such as PS4 and Xbox, Smartphones. Depending on the OS of your phone, you can use the GSE App or IP Television App for iOS and Perfect Player and Kodi on Android phones.

Computers (Windows, Mac OS, Linux)

Based on many feedbacks around the internet, VLC is the most commonly used application for streaming IPTV channels on Computers. However, we are going to mention a few other useful applications as well.

In addition to streaming service, PCs can be set up to use digitally downloaded media as well as playback DVD and Blu-ray if you have the appropriate hardware. The best part is that the computer can also be a hub for digital content. You can also take your Laptop with you anywhere you want and watch live streams with a simple internet connection. This way you never miss a TV show or a big sports event.

VLC media player (Windows, Mac OS, Linux)

The most commonly used Application on these mentioned operating systems is the VLC media player. VLC offers the best solution for IPTV usage and is compatible with most of the hardware and operating systems. How to setup IPTV on VLC?

Perfect Player (Windows, Mac OS)

Perfect Player is an Android application that simulates a set-top box which can be used for streaming IPTV channels on your favorite devices such as tablets, smartphones, and Smart TVs. Please note, that this application doesn’t include any IPTV channels. In order to add IPTV channels, you must add your own m3u playlists inside the settings section. What is the M3U list
Perfect Player is available on AndroidiOSLinux, and Microsoft Windows. How to add IPTV channels to Perfect Player on Computers?

MyIPTV Player

This is an exceptional media player with EPG to play your IPTV channels on your Windows Phone, Windows 10, and Xbox One.  You can simply load your M3U playlist from storage or remote source and you are good to go. MyIPTV Player on Windows

Kodi (Windows, Mac OS, Linux)

Kodi is an open-source media player which is a free application that functions as a digital media center. This application enables you to play your media, and cast it between various devices, from a primary location to other devices. How to set up IPTV on Kodi for Computers? You can use Kodi on most of operating systems such as Android, Microsoft Windows, Linux, iOS, and devices such as Amazon FireTV, Smartphones, Apple TV, Xbox, and PC.

Conclusion

VLC media player, Perfect Player, and Kodi are the perfect choices for streaming IPTV content on Computers or Laptops and are very easy to install. There are other applications available on the internet, however, we highly recommend these mentioned apps for ease of access and a better experience.

Smart TV’s Operating systems 

SIPTV is the most recommended app to use on smart TVs such as LG, Samsung, and Sony. Currently, SIPTV (Smart IPTV App) is the most used application for streaming IPTV channels on Smart TV with frequent updates and a user-friendly interface.

Other than SIPTV, we are also going to mention other apps as well, such as Kodi on Smart TV which will be a great addition to your home entertainment unit.

All you need is a Smart TV and an internet connection. This application also supports EPG as well as Picons and grouping. In order to have EPG, Picons, and channel groups , the M3U file or URL that you are uploading to this application, must be m3u with options.

SIPTV (Smart IPTV App)

With the help of this application, no matter what brand of Smart TV you are using this app works on all Smart TVs such as LG, Samsung, and Sony. You can play your OTT and IPTV streams on your Smart TV.

The most popular way is by downloading an application called SIPTV App (Smart IPTV App) on your TV and uploading your M3U playlist with your TV Mac address on the SIPTV website. How to setup IPTV on Smart TV via Smart IPTV App(SIPTV)?

Kodi on Smart TV

Many TVs offer different operating systems and user interfaces that might not match the requirements of Kodi. However, if your Smart TV doesn’t support Android, don’t worry, there are a few other options so that you can enjoy watching IPTV channels on your Smart TV via Kodi. How to use Kodi.

The main reason to have Kodi on your Smart TV is to take advantage of all the great Kodi add-ons base which we will discuss ahead. Kodi is an Open Source application, this means any developer can have access to its source code and develop an add-on on it in order to add new functionalities to the App.
Due to some restricted policies around Kodi and IPTV streaming in general, some add-ons must be installed through third-party repositories and added to your Kodi app. How to install Kodi on Smart TV?.

Smart STB app on Smart TV

Smart STB is an Android app which can be installed on Samsung and LG smart TVs. This app enables you to have IPTV service on a portal just like MAG setup boxes with all characteristics that can be expected from MAG and Stalker Portal. How to install the Smart STB app on Smart TV?

IPTV on SS IPTV

SS IPTV is a free multi-purpose player for streaming media in the local network or through the internet. The app is compatible with the services of hundreds of IPTV operators. User’s own IPTV playlists are also supported. How to setup IPTV on SS IPTV?

How to add an M3U playlist to Smart STB?

To learn how to activate and install the Smart STB app, Please visit the article and then follow the steps described in How to Add M3U playlist to Smart STB.

Conclusion

We tried to explain the best ways to watch IPTV on Smart TV in this section. There are other applications available on different Smart TVs, however, we don’t recommend using those apps since these apps that we mentioned have proven their worth over the past few years. If your TV supports Android then you have tons of other options such as Perfect Player, GSE app, and … The list goes on. How to set up IPTV using GSE IPTV App?

Smartphones, Tablets and Setup boxes (Android, iOS, Windows Phone)

Depending on the Operating System, Kodi for Android and GSE app for iOS is the best choice for streaming IPTV channels on your phone. However, we are going to discuss which app is the best choice for streaming Live channels on your Smartphones based on the Operating System of the device.

Kodi (Smartphones, Tablets, and Setup boxes)

Kodi is relatively available on all the setup boxes such as Nvidia Shield, Amazon FireTV, RaspberryPi, Smartphones, Xbox One, Smart TVs, and basically all the devices that have access to Google Player Store or Apple Store.

Android

There is a lot of IPTV application available on the Android Operating System, however, many of those application doesn’t function very well and are most likely not optimized on most Smartphones. In this section, we are going to introduce the best IPTV Apps on Android.

IPTV EXTREME PRO

It’s a very handy player and has so many performance tuning options which are a great addition and benefit compared to other applications. First, you’ll need to add a Playlist by inserting an m3u link or selecting a previously saved playlist file. What is M3U?

Along with other IPTV applications on Android that we are going to mention, the IPTV EXTREME PRO app is one of the most recommended ones. How to setup IPTV via IPTV EXTREME?

IPTV Smarters App

IPTV Smarters is an Android Application based on Xtream Code that provides your esteemed customers the facility to watch Live TV, VOD, Series, and TV Catchup on their Android Devices (Mobiles, Android Boxes, Fire TV Stick, etc.).

In order to have IPTV channels on this, you will need to enter your UsernamePassword, and Server URL that is provided by your IPTV service provider. How to setup IPTV using IPTV Smarters app?

GSE IPTV App

GSE SMART IPTV is a comprehensive user-defined Advanced IPTV solution for live and non-liveTV streaming. With a built-in strong player that supports most formats including M3U with options.

GSE is another great addition to this list and will definitely serve all your needs for your IPTV experience. How to setup IPTV using GSE IPTV App?

Perfect Player

Perfect Player is an Android application that simulates a set-top box which can be used for streaming IPTV channels on your favorite devices such as tablets, smartphones, and Smart TVs. Please note, that this application doesn’t include any IPTV channels. In order to add IPTV channels, you must add your own m3u playlists inside the settings section. What is the M3U list? Perfect Player is also available on iOSLinux, and Microsoft Windows. How to setup IPTV on Perfect Player?

Android STB Emulator

This App is intended to be used by expert users. To operate accurately it needs to be configured first and if you’ve never configured IPTV boxes it may be confusing for you to configure it.

Please note, that by making a simple mistake during your configuration, the App will become unusable. In this tutorial, we are going to show you how to use the STB emulator on your device in order to watch IPTV. How to setup IPTV on Android devices using STB Emulator?

“IPTV” Application

Watch IPTV from your Internet service provider or free live TV channels from any other source on the web the “IPTV” Application (This is the name of the app and it is not referring to the IPTV industry).  If you are utilizing a VLC media player to watch TV on your PC then this app is highly recommended to you. How to setup IPTV on “IPTV” Application?

IPTV on SS IPTV

SS IPTV is a free multi-purpose player for streaming media in the local network or through the internet. The app is compatible with the services of hundreds of IPTV operators. User’s own IPTV playlists are also supported. How to setup IPTV on SS IPTV?

IPTV on ProgTV

ProgTV formerly known as HyppTV, is a simple but handy and comprehensive application for streaming IPTV channels and listening to radio channels over the Internet or local network. How to set up IPTV on ProgTV?

iOS

Some of the iOS applications are also available on Android such as the GSE app or IPTV Smarters app and we are going to mention some of the great applications that you can use on an iOS platform.

IP Television App

IP Television enables you to stream universal channels, worldwide broadcasters, and VOD on your iPhone and iPad (and on your Apple TV). Wherever you are! You just require an internet connection!

You can build or upload all the channels and playlists with IP Television.
IP Television has an intuitive interface and enables you to simply control and refresh your playlists. How to setup IPTV using IP Television App?

Cloud Stream IPTV

Cloud Stream IPTV Player is a free program for iPhone that relates to the category of IPTV streaming and has been produced by Giovanny Aranda. This program is accessible in French, English, Italian, and Spanish languages. What is internet streaming?

Watch the TV IPTV from your ISP or any other TV Internet source from your iPhone or iPad with EPG and the ability to create a favorites list from your selected channels. How to set up IPTV using Cloud Stream IPTV?

GSE IPTV App

GSE SMART IPTV is a complete user-defined advanced IPTV solution for your iOS device. With a built-in strong player that supports most formats including M3U with options.

GSE Player is also available on Android. How to setup IPTV using GSE IPTV App?

IPTV on iOS using rIPTV

With the help of this application, you can enjoy all your multimedia content on a single device in a single application. rIPTV brings streaming and on-demand television to your iOS device. Intuitive and easy to use. How to setup IPTV using rIPTV?

IPTV on iOS using the IPTV Smarters app

IPTV Smarters is an iOS Application based on Xtream Codes that provides your esteemed customers the facility to watch Live TV, VOD, Series & TV Catchup on their iOS Devices (Mobiles, iOS Boxes, etc.). How to set up IPTV using the IPTV Smarters app?

Conclusion

There you have it. We tried to explain all the five main Operating systems for IPTV streaming in a comprehensive article. If you think we missed out on anything else, feel free to discuss it with us in the comments section down below and help us improve the quality of our articles. Thank you in advance.

Developed by iptvhelpcenter.net

How to setup IPTV on GSE via Xtream-Codes API?

In this tutorial, we are going to show you how to bring IPTV channels to your GSE SMART IPTV App. GSE is a comprehensive user-defined Advanced IPTV solution for live and non-liveTV streams. With a built-in strong player that supports most formats including M3U with options.
It is available in both Android and iOS devices.

We will set IPTV in GSE App using Xtream-Codes API here, also there is another way to set IPTV in GSE App.
How to set up IPTV on GSE via Remote Playlist?

The Advantages of using Xtream-Codes API to setup GSE App:

By using Xtream-Codes API you can add EPG information easily, No need to add the EPG url.
Also, EPG auto update is available.

If the IPTV provider presents a Catch-up feature, you will have this option in Xtream-Codes API like the MAG portal system.

You can download this app via the link below:

Android devices:
https://apkpure.com/gse-smart-iptv/com.gsetech.smartiptv

iOS:
https://itunes.apple.com/us/app/gse-smart-iptv/id1028734023?mt=8

How to add IPTV channels to GSE using Xtream-Codes API

Step 1: Start by downloading the GSE IPTV App from the Google Play Store and on the top left you have the options (three lines).
Click on “Xtream-Codes API”.

Step 2: On the down right corner click on the red circle.

Step 3: Select a name for the IPTV list, you can choose any name for example “MY IPTV”.
Enter the Server nameUsername, and Password, you can find all these details in the M3U URL which your IPTV provider sends.
After finishing entries click on “Add”.
How to find the Server Address, Username and Password?

Step 4: Now you will find your “IPTV list” in the menu, click on it.

Step 5: Wait for the channels to be added to your application and this might take a little time depending on which countries or channels groups your M3U file contains.
You will see the LIVE channels and VOD list.

Step 6: By clicking on LINE you will see the channel groups.
Select the channel that you want to watch and click on “Play”.

Now your GSE Android app is ready for streaming IPTV channels on your Android device.

How to load EPG in GSE using Xtream-Codes API

Step 1: You can easily add EPG in GSE by clicking on “INSTALL EPG DATA”

Step 2: Wait until the EPG data downloads after that you can see the EPG list by clicking on “ELECTRONIC PROGRAM GUIDE”.

Developed by iptvhelpcenter.net

How to setup IPTV on GSE via Remote Playlist?

In this tutorial, we are going to show you how to bring IPTV channels to your GSE SMART IPTV App. GSE is a comprehensive user-defined Advanced IPTV solution for live and non-liveTV streams. With a built-in strong player that supports most formats including M3U with options.
It is available on both Android and iOS devices.

We will set IPTV in the GSE App using Remote Playlists here, also there is another way to set IPTV in the GSE App.
How to set up IPTV on GSE via Xtream-Codes API?

You can download this app via the link below:

Android devices:
https://apkpure.com/gse-smart-iptv/com.gsetech.smartiptv

iOS:
https://itunes.apple.com/us/app/gse-smart-iptv/id1028734023?mt=8

How to add IPTV channels to GSE

Step 1: Start by downloading the GSE IPTV App from the Google Play Store and in the menu click on Remote Playlist.

On the down right corner click on the red circle, then Add M3U URL.

Step 2: Now select a name for your playlist paste your M3U URL and click on “ADD“.

Step 3: Now click on the playlist you just added in order to see the channel groups.

Step 4: Now wait for the channels to be added to your application and this might take a little time depending on which countries or channels groups your M3U file contains.

Step 5: Now select the channel that you want to watch and click on “Play“.

How to setup IPTV on GSE via Remote Playlist

Now your GSE Android app is ready for streaming IPTV channels on your Android device.

Features

  • Chromecast
  • XTREAM-CODES API
  • API support automatic live and VOD playlist including EPG and movie info.
  • EPG XMLTV FORMAT (local and remote file support, XML, zip, gzip formats)
  • Parental control
  • Copy and paste M3U contents
  • Dynamic language switching (31 LANGUAGE)
  • Multiple themes
  • Built-in player supports all popular formats including RTMP tokens

Live stream IPTV support
✔ HTTP, HSL, M3U8, MMS, RTSP and more
✔ RTMP supports all options including secure tokens

Developed by iptvhelpcenter.net

How to setup IPTV on ProgTV?

ProgTV formerly known as HyppTV, is a simple but handy and comprehensive application for streaming IPTV channels and listening to radio channels over the Internet or local network. What is internet streaming?

You can download this app from the Google Play Store via the link below:

https://play.google.com/store/apps/details?id=com.progdvb.progtva&hl=en_US

How to add IPTV channels to the ProgTV app

Step 1: On the main menu of the application, select “TV Sources” and proceed to the next step.

Step 2: Now select “IPTV Client” as depicted via a red arrow in the below picture.

Step 3: Now you must enter your M3U URL in the “Playlist” section and insert your EPG URL in the “Codepage” section. What is M3U?

Step 4: Now head back to the main menu and select “Channel list” and the channels you just added will appear.

Please note, this application is also available on Windows phones and the installation procedure is exactly the same as we demonstrated in this article.

Features and functions of the ProgTV app

  • Support of one or more M3U(M3U8), XSPF channel lists. Channel logos, guide, auto-updating.
  • Guide (EPG) in XMLTV and JTV formats support (include zip, gzip)
  • Internet TV and Radio. ITV format of lists (from ProgDVB)
  • Support of Katrina TV, Xtream-Codes IPTV panel
  • Torrent TV links in M3U or other link formats.
  • DVB over IP.
  • SAT>IP.
  • The client of ProgDVB receives channels from the DVB device.

    Functions:

  • TimeShift
  • Record.
  • Scheduler.
  • Subtitles.
  • Information about channel format.
  • The interface is optimized for the phone, a pad, and a TV (including remote control use).
  • Support of more than one channel list at the same time.
  • Favorites list.
  • Per channel zoom and ratio settings.
  • Equalizer, AGC, Spectrum.
  • Folder for user logo of channels.

Let us know in the comments section below about your opinion and feedback concerning this article. Thank you in advance.

Developed by iptvhelpcenter.net

How to setup IPTV on IPTV Extreme?

In this Tutorial, we will explain how to set up the IPTV Extreme Pro app on your Android device. It’s a very handy player and has so many performance tuning options. First, you’ll need to add a Playlist by inserting an m3u link or selecting a previously saved playlist file. What is M3U?

Download the IPTV Extreme or IPTV Extreme pro from the google play store.

  1. Free Version – play.google.com/store/apps/details?id=com.pecana.iptvextreme&hl=en_GB 
  2. Paid Version – play.google.com/store/apps/details?id=com.pecana.iptvextremepro&hl=en_GB 

How to add IPTV channels to IPTV EXTREME PRO

Step 1: After downloading the version of your choice, start the application and wait for it to load up.

Step 2: Now click on the three dots in the upper right corner of your screen.

Step 3: Now select “Playlists” as depicted via a red arrow.

Step 4: Now click on “ADD PLAYLIST” and proceed to the next section.

Step 5: Now select “FILE OR LINK TO PLAYLIST“.

Step 6: Now you must enter a name for your playlist and then insert your M3U URL which you can obtain from an IPTV provider and click on “OK“.

Step 7: Now you must wait for the app to load the playlist. This might take a few minutes.

Step 8: Now click on the “OK” and proceed to the next step.

Step 9: Now click on the playlist you just added.

Step 10: Now you can select each channel group as depicted via red arrows and start streaming.

IPTV EXTREME PRO features

  • Integrated Player (Advanced & Light)
  • Chromecast Support (Beta)
  • Parental Control
  • Remote Controller support
  • Backup / Restore Settings
  • M3U playlists support
  • Multi EPG support (TV Guide)
  • Auto EPG update
  • EPG alias management
  • All the EPG providers are included
  • Picons support in different size
  • Ability to download On Demand Programs!
  • Ability to record Live Streaming within a time limit!
  • More than 10 Themes are available!
  • Time Recording
  • Timers Management
  • Autostart On Boot Function
  • Set Memo function for Events on TV Guide
  • Search for Similar Events on TV Guide
  • Sliding EPG time

Developed by iptvhelpcenter.net

How to setup IPTV on Lazy IPTV?

In this tutorial, we will show you how to set up IPTV on Android using a Lazy IPTV player.

This application enables you to view TV technology-based IPTV. This application does not contain built-in playlists, and is only a client, allowing convenient and comfortable to watch TV online. Please use playlists in the format m3u with options or xspf.

You can download this app via the link below:

https://play.google.com/store/apps/details?id=com.lazycatsoftware.iptv&hl=en_US

How to add IPTV channels to Lazy IPTV

Step 1: In order to add your M3U URL, start by clicking on “New Playlist” and then select “From Internet(by URL)”.

 Step 2: Here you must give a name to your playlist inside the “playlist’s name” Paste your M3U link inside the “path to playlist file or URL” and click on save.

Step 3: Your playlist should be added now. You can select a group and select a channel to start your TV session.

Features of Lazy IPTV

  • m3u-playlist support (in open-view or v zip/gz), feature to add playlists from the device file system, from the internet or clipboard
  • can play HTTP and UDP streams, and links from vk-video/youtube
  • Internet radio playback via the built-in audio player
  • support several UDP proxies, that can be switched directly with the working playlist
  • support auto-update playlist, and using a cached version if not available
  • customizable main-screen in title-style view, playlists, and most watched channels can be placed there, and a base function of application with titles sorting
  • favorites, with support, nested folders, grouping the same channels in different playlists

Let us know in the comments section below about your opinion and feedback concerning this article. Thank you in advance.

Developed by iptvhelpcenter.net

How to setup IPTV on Wiseplay?

In this tutorial, we will show you how to add an M3U URL to Wiseplay. This is a free multiplatform multimedia player. It is compatible with many video formats and playing lists. Thanks to its simple interface it is very easy to play local videos as well as videos hosted in remote servers.

It is possible to cast content from a mobile device to a TV using DNLA or Chromecast, as long as the video format is compatible. The icons will automatically show whenever there are compatible devices in the same network. How to use IPTV on Chromecast?

You can download this app via the link below:
https://play.google.com/store/apps/details?id=com.wiseplay&hl=en_US

How to add a list from a URL

Step 1: To add a playlist using an M3U URL, select the pink circle at the bottom right corner of your screen select “Add List from URL” and paste your M3U URL“.

Step 2: After importing your M3U URL,  select your added playlist. What is the M3U list?

Step 3: Here you will be able to select the channels based on each group.

Features of Wiseplay

  • Video Lists You can load video lists in w3u and m3u format directly from a file, using a link or scanning a QR code.
  • Cast Send content compatible with Wiseplay to your TV using Chromecast devices or DLNA.
  • Android TV Version designed and adapted to TV and AndroidTV devices.
  • VR Player Play your videos in 3D or Virtual Reality format, it is very simple, just choose a video from your gallery or use a link, and connect your VR glasses. In addition, we
  • have included a Cinema Mode to watch any kind of video in VR.

Let us know in the comments section below about your opinion and feedback concerning this article. Thank you in advance.

Developed by iptvhelpcenter.net

How to setup IPTV on IP Television App?

IP Television enables you to stream universal channels, worldwide broadcasters, and VOD on your iPhone and iPad (and on your Apple TV) and also Android devices. Wherever you are! You just require an internet connection!

You can download this app via the link below:

Android:
https://play.google.com/store/apps/details?id=tv.iptelevision.iptv

iOS:
https://apps.apple.com/app/ip-television-iptv-m3u/id884206090

How to bring IPTV channels to IP Television App

Step 1: Open the IP Television App.
You have to Option to add the IPTV list in the IP Television App.
Manual Load Channels” and “Xtream-Codes Account“.
We offer Xtream-Codes because you will have more features

In this article, we will show both methods.

Step 2: If you select “Manual Load Channels“.
You will see the below setting.
Add any name you want for example “IPTV Playlist” in the first box.
In the second box enter the M3U url which you get from your IPTV provider.
The progressive IPTV providers give you a dashboard in which you can access your M3U URL in dashboard.

If you select “Xtream-Codes Account“.
Add any name you want in the first box.
On the third and Fourth boxes, enter the “Username” and the “Password” of your M3U line and in the second box the server URL which can also be found on your M3U line.
The progressive IPTV providers give you a dashboard in which you can access your M3U URL in the dashboard.
How to find the Server Address, Username, and Password?

Step 3: Now click on the playlist you just added in order to see the channel groups.

Step 4: Now select the channel that you want to watch and Enjoy!

Features

Comfortable and Handy
IP Television is very straightforward to utilize and has several features.
– Inject numerous playlists and control them efficiently.
– Add channels in 4 separate forms.
– Apply the Electronic Program Guide or EPG.
– And many more…

You can build or upload all the channels and playlists with IP Television.
IP Television has an intuitive interface and enables you to simply control and refresh your playlists.

IP TELEVISION FEATURES:
– Start and control your channel playlists.
– Utilize the menu bar to watch Video on Demand.
– Watch your desired channels.
– Arrange a channel list into sections.

Developed by iptvhelpcenter.net

How to setup IPTV on Android devices via STBEmu?

Set-top boxes are an excellent way to enjoy your IPTV services. If you don’t want to purchase a Mag Set-top box like the model 254 then you can use an Android machine to imitate the hardware and interface of a Mag box.
Please note, that you will need a powerful device to use this emulator.

This App is intended to be used by expert users. To operate accurately it needs to be configured first and if you’ve never configured IPTV boxes it may be confusing for you to configure it. Please note, that by making a simple mistake during your configuration, the App will become unusable.

In this tutorial, we are going to show you how to use STBemu on your device in order to watch IPTV.
Also, this tutorial helps you to set up STBemu Pro.

NOTE: This application is not an official app, so maybe hackers can use it to steal your IPTV subscription details, so we do not offer this application.

Setup STB Emulator

Step 1: You need to download the STB emulator App from the Play Store via the link below and proceed to the next step after installing the app.

STB Emulator:https://play.google.com/store/apps/details?id=com.mvas.stb.emu.free&hl=en

STB Emulator Pro: https://play.google.com/store/apps/details?id=com.mvas.stb.emu.pro&hl=en

Step 2: On the top right corner select “Settings
If it’s the first time you open the app in the Greeting page you have “Configure Application” instead.

Step 3: Select “Profile“.

Step 4: Select “New profile“.

Step 5: You can enter any name in the profile name then Select “STB Configuration“.

Step 6: Find your Mac address here.
What is the MAC address?

MAC address is a number of sorts that you are going to need to tie your device to your subscription.
It usually starts with “00:1A:79: … ”, you should provide the full MAC digits to your IPTV provider.
Privileged IPTV providers give you a dashboard to can edit your IPTV subscription, in the dashboard you can add the MAC.
And if there is not any dashboard, need to contact the IPTV provider about this case.

Tip: If the MAC you have doesn’t start with “00:1A:79: … ”,
Turn on your device and open the Application.
In the main menu select System and then System info > Select the network tab.
Write down the last 6 characters of your Mac address (For example: If your Mac address is”2A:B3:35:03:E7:36″ then you should write down 03:E7:36)
In the text field enter 00:1A:79: followed by the last six characters of your Mac address (For example 00:1A:79:03:E7:36)

Step 7Head back and select “Portal settings” click on “Portal URL” and enter the Portal address provided by your IPTV distributor.

Step 8: Head back and select “Save and restore settings“.

Step 9: Select “SAVE SETTINGS AND PROFILES“.

In the end, restart your device and the portal will start to load.

You have finished setting up an Android device to imitate an IPTV set-top box. Now you have a set-top box experience without purchasing a Mag box. The STB emulator can be a bit challenging to use so if you notice any errors try exiting and restarting the App, or removing the App and installing it again.

Developed by iptvhelpcenter.net

How to add EPG on Perfect Player?

Perfect Player is an Android application that simulates a set-top box that can be used for streaming IPTV channels on your favorite devices such as tablets, smartphones, and Smart TVs. Please note, that this application doesn’t include any IPTV channels. In order to add IPTV channels, you must add your own m3u playlists inside the settings section. What is the M3U list?
Perfect Player is available on AndroidLinux, and Microsoft Windows.

In this tutorial, we are going to show you how to add EPG to your Perfect Player Application. How to set up IPTV on Perfect Player Android?

How to add EPG to Perfect Player

Step 1: After starting the Perfect Player, click on “Settings“.

Step 2: Now select “General“.

Step 3: Now select “EPG URL or file path” Enter your EPG URL provided by your IPTV distributor and select “OK”.
You can add more than one EPG url here.

Step 4: Now restart the Application and wait for your channels to load.

That’s all. Your ‘EPG‘ should then be displayed with your list of channels.

If you think need further help, feel free to discuss it with us in the comments section below.

Developed by iptvhelpcenter.net

How to setup IPTV on Perfect Player?

Perfect Player is an Android application that simulates a set-top box that can be used for streaming IPTV channels on your favorite devices such as tablets, smartphones, and Smart TVs. Please note, that this application doesn’t include any IPTV channels. In order to add IPTV channels, you must add your own m3u playlists inside the settings section. What is the M3U list?
Perfect Player is available on AndroidLinux, and Microsoft Windows.

You can download this app via the link:https://play.google.com/store/apps/details?id=com.niklabs.pp&hl=en_US

How to add IPTV channels to Perfect Player?

Step 1: After the Application is downloaded on your device, open itOn the main menu, click on “Settings“.

Step 2: Go to “General” and Select “Playlist“.

Step 3: Now enter your “M3U URL” and click on “OK“.

Step 4: After Pasting the M3U URL which is provided by your IPTV distributor, click on “GUI“.

Step 5: Now click on “Show channels groups as folders“.

Step 6: Now head back to the main menu and you will see that the channels are being updated and added to your Perfect Player App.

Please note, in order to get the best playback experience try different decoder options in settings which are explained below.

Playback Issues

Click on “Playback” in settings.

If you are facing playback issues, stuttering, buffering, etc. Perfect Player enables you to select the type of decoder and change the buffer size. Under the playback settings, you can choose from different types of decoders.

Auto is the best default decoder, HW+ is the second best, then Hardware, and if you have a slow connection, you can try SW. Buffer settings are pretty simple, you can choose 1 through 4, 1 being the smallest, and 4 being the largest buffer size.

How to add EPG on Perfect Player?

If you think need further help, feel free to discuss it with us in the comments section below.

Developed by iptvhelpcenter.net

How to setup IPTV on rIPTV?

With the help of this application, you can enjoy all your multimedia content on a single device in a single application. rIPTV brings streaming and on-demand television to your iOS and Android devices. Intuitive and easy to use. What is Internet streaming?

rIPTV adds an electronic program guide to all your channels and let you find what you’re watching at the moment. It also lets you find showtimes, watch trailers, browse photos, and display rating and information on all your movies. What is video on demand?

Where to download?

You can download this amazing application from iTunes via the URL below:
Android:
https://play.google.com/store/apps/details?id=areaengineering.android.mytv
iOS:
https://itunes.apple.com/be/app/riptv/id1060510958#?platform=iphone

How to setup IPTV on rIPTV app

Step 1: Start by clicking on the “+” button at the bottom of the screen.

Step 2: Now on the first field insert a name for your Playlist and on the second field insert your M3U URL and then click on “Add“. What is M3U?

Step 3: After inserting the M3U URL you can see a “Loading” sign and after the loading is finished you can start watching your IPTV channels on your device.

Main features of rIPTV

  • Turn your iOS device into a portable TV and watch your favorite channels and on-demand movies anywhere you go
  • Multiple IPTV playlists
  • iPad Multitasking support
  • Infinite channel scrolling
  • Channel Icons
  • Auto Group Channel
  • Upload and refresh playlists without reload
  • Easy to use beautiful interface
  • Play all files not only live streaming
  • Enjoy EPG (Electronic Program Guide) on all your channel
  • Play/Pause Live TV
  • Video Scrolling
  • Enjoy information about live programs and on-demand movies or TV series
  • Movies description and information based on the most popular database on the web (IMDB)
  • Choose what you want to see before watching it: enjoy rating and movie trailers
  • Based on VLC
  • Favourite Channels
  • Enjoy 3D Touch Functions on supported devices
  • Use Today Widget
  • Add remember: never lose your favorite events
  • Find your program directly on Spotlight
  • Support iOS9 +

Let us know in the comments section below about your opinion and feedback concerning this article and help us improve the quality of our articles. Thank you in advance.

Developed by iptvhelpcenter.net

How to setup IPTV on “IPTV” Application?

Watch IPTV from your Internet service provider or free live TV channels from any other source on the web through the “IPTV” Application (This is the name of the app and it does not refer to IPTV industry).  If you are utilizing a VLC media player to watch TV on your PC then this app is highly recommended to you. How to set up IPTV on a VLC media player?

You can download this application from Google Play Store via the link below:
https://play.google.com/store/apps/details?id=ru.iptvremote.android.iptv&hl=en_US

How to add IPTV channels to “IPTV” Application

Step 1: You can start by downloading the app from the Google Play Store.

Step 2: Now click on the “EDITat the bottom of your screen.

Step 3: Now click on “+“.

Step 4: Now click on “Add URL“. From here you can upload your M3U file or insert it via a URL. What is M3U?

Step 5: After this, the channel list will be displayed on your screen, and before playing the channels you will be asked to download a supported player such as an IPTV core player or MX player.

Note: we highly recommend that you download the VLC media player from the Google Play Store and choose it as your streaming player to get advanced options.

Step 6: Now select the VLC player for a better viewing experience.

You will be asked to download the app and after the download process is finished, you can start streaming your IPTV channels.

Let us know in the comments section below about your opinion and feedback concerning this article and help us improve the quality of our articles. Thank you in advance.

Features of “IPTV” Application

  • M3U and XSPF playlists support
  • Playlists history
  • Playing multicast streams with UDP proxy (proxy needs to be installed in your LAN)
  • Grid, list or tile view of TV channels
  • EPG support in XMLTV and JTV formats

    Additional features are available in the Pro version:

  • Ad-free
  • Ability to auto-reconnect to the streaming server when the connection is closed unexpectedly (HTTP streams only).
  • Start the app on the device boot option, useful for set-top boxes.
  • Auto-play last channel option
  • Extended playlists history

Developed by iptvhelpcenter.net

iOS

How to setup IPTV on IPTV Smarters Pro?

IPTV Smarters Pro is one of the most user-friendly IPTV applications that provides your esteemed customers the facility to watch Live TV, VOD, Series, Catch-up, and Multi-Screen on their Android and iOS Devices (SmartphonesSmart TVsAndroid Boxes, etc).

One of the most interesting features of IPTV Smarters is Catch-up.
They are not many applications which provide Catch-up, before we only had this feature in MAG boxes.

Here is the list of devices you can use for IPTV Smartes Pro:

  • Android Smartphones
  • iOS Smartphones
  • Smart TVs
  • Android Boxes
  • Apple TV
  • Computer (both Windows and MacBooks)
  • Firestick

IPTV Smarters is one the best options to watch IPTV on the above devices.
Another choice can be the GSE Smart IPTV app.
How to setup IPTV on GSE?

Where can I download IPTV Smarters Pro?

The best and safest source to download the IPTV Smarters Pro app is the IPTV Smarters website, you can download the download link of the app for different devices here:
https://www.iptvsmarters.com/#downloads

But we put the guide on how you can download and install IPTV Smarters Pro for different devices here, to access it easier and faster:

APK file for Android devices

For you Android device like an Android SmartphoneAndroid box or a Smart TV with Android OS you can download the APK file IPTV Smarters Pro here directly:
https://www.iptvsmarters.com/smarters.apk

Samsung Smart TV

On the remote of your Samsung Smart TV you have a Smart HUB button, click on it and search for IPTV Smarters Pro to find the app. Version 1.0.4 is compatible with Samsung Smart TVs.

LG Smart TV

On the remote of your LG Smart TV click on Home Button and go to LG Content Store, you can search for IPTV Smarters Pro here and install it.
Version 1.0.8 is compatible with LG Smart TVs.

Google play store

Unfortunately, Google play removed the app from the store for now, if they add it again we will put a link here.

iPhone and Apple store

You can download IPTV Smarters Pro for your iPhoneApple TV, or any other iOS device here in Apple store:
https://apps.apple.com/in/app/smarters-player-lite/id1628995509

Computer (Windows or Mac)

Here is the installation for different operating systems on the computer.
EXE file for Windows:
https://www.iptvsmarters.com/download/?download=windows_app

DMG file for Macbook:
https://www.iptvsmarters.com/download/?download=mac

Firestick

First, you need to download the Downloader app for Firestick (you can simply search for it in youtube how install) and IPTV Smarters Pro APK file from here.
Then Go to settings of Firestick and follow this path: My Fire TV -> Developer Options -> Install from unknown apps -> Click Downloader to change the status to ON.
Open the downloader app and put the complete APK link on the downloader and then install the app.

How to add IPTV channels to the IPTV Smarters Pro app

You can add IPTV channels to IPTV Smarters in two methods:

  1. Setup via Xtream Codes API
  2. Setup via Playlist

We recommend setup via Xtream Codes API because you will have the Catchup feature this way and also do not need to add any EPG URL (it will load automatically).

Setup IPTV Smarters via Xtream Codes API

Step 1: Install the app on your device from here.

Step 2: Open the app once downloaded and click on “Add user” then click on “Log in with Xtream Codes API“.

Step 3: In this step, in the first box, select any name you want for example “IPTV Xtream”. On the second and third boxes, enter the “Username” and the “Password” of your M3U line and the server URL which can also be found on your M3U line.
The progressive IPTV providers give you a dashboard in which you can access your M3U URL in the dashboard.
How to find Server Address, Username, and Password?
Please note Server URL is different for Samsung and LG Smart TVs

Now Click on “ADD USER” to proceed to the next section.

Step 4: Wait some seconds.

Step 5: Now click on the “Live TV” icon as depicted in the image via a red arrow.

Step 6: Now you must select the channel group that you want to watch and proceed to the next section.

Step 7: Now you must click on the channel name and then double-click on the small screen to turn into full screen as the final step.

Step 8: To add EPG no need to add any EPG URL, Just click on “Install EPG” .

LG and Samsung Smart TV’s

For adding channels to your IPTV Smarters app on your LG or Samsung TV you need to use a URL which is: http://smarters.link 
You must also insert the username and password which you can find on your M3U link or you can simply ask from your IPTV provider.

Setup IPTV Smarters via Playlist

Step 1: Install the app on your device from here.

Step 2: Open the app once downloaded and click on “Add user” then click on “Login with Playlist“.

Step 3: In this step, in the first box, select any name you want for example “IPTV Playlist”.
Select “M3U URL” and enter the M3U URL which you get from your IPTV provider.
The progressive IPTV providers give you a dashboard which you can access your M3U URL in the dashboard.

Step 4: To add EPG click on “Install EPG”  and enter the EPG url.

Step 5: Now click on the “Live TV” icon, select the channels group then the channel you want to watch.

Enjoy!

IPTV Smarters features

  • Live, Movies, Series & TV
  • Catchup Streaming
  • Record the program
  • Multi-Screen; you can watch up to 4 channels in same time
  • Support: EPG
  • Parental Control Integrated for each category
  • Built-in powerful player
  • Support: Playing with External Players
  • Attractive & Impressive Layout and More User-Friendly
  • Support: Dynamic language switching

We tried to explain two methods for having IPTV channels in IPTV Smarters in this article.

Please feel free to discuss it with us in the comment section down below.

Developed by iptvhelpcenter.net

Softwares you need for watching IPTV

According to the Operating System of your device, you can use these kinds of software/apps: VLC media player (Windows Microsoft-Linux-Macintosh OS-Android), Perfect Player (Android), KODI, SIPTV (Smart TVs), and Enigma2 (Linux) MAG box, gaming consoles such as PS4 and Xbox, Smartphones. Depending on the OS of your phone, you can use the GSE App or IP Television App for iOS and Perfect Player and Kodi on Android phones.

Computers (Windows, Mac OS, Linux)

Based on many feedbacks around the internet, VLC is the most commonly used application for streaming IPTV channels on Computers. However, we are going to mention a few other useful applications as well.

In addition to streaming service, PCs can be set up to use digitally downloaded media as well as playback DVD and Blu-ray if you have the appropriate hardware. The best part is that the computer can also be a hub for digital content. You can also take your Laptop with you anywhere you want and watch live streams with a simple internet connection. This way you never miss a TV show or a big sports event.

VLC media player (Windows, Mac OS, Linux)

The most commonly used Application on these mentioned operating systems is the VLC media player. VLC offers the best solution for IPTV usage and is compatible with most of the hardware and operating systems. How to setup IPTV on VLC?

Perfect Player (Windows, Mac OS)

Perfect Player is an Android application that simulates a set-top box which can be used for streaming IPTV channels on your favorite devices such as tablets, smartphones, and Smart TVs. Please note, that this application doesn’t include any IPTV channels. In order to add IPTV channels, you must add your own m3u playlists inside the settings section. What is the M3U list
Perfect Player is available on AndroidiOSLinux, and Microsoft Windows. How to add IPTV channels to Perfect Player on Computers?

MyIPTV Player

This is an exceptional media player with EPG to play your IPTV channels on your Windows Phone, Windows 10, and Xbox One.  You can simply load your M3U playlist from storage or remote source and you are good to go. MyIPTV Player on Windows

Kodi (Windows, Mac OS, Linux)

Kodi is an open-source media player which is a free application that functions as a digital media center. This application enables you to play your media, and cast it between various devices, from a primary location to other devices. How to set up IPTV on Kodi for Computers? You can use Kodi on most of operating systems such as Android, Microsoft Windows, Linux, iOS, and devices such as Amazon FireTV, Smartphones, Apple TV, Xbox, and PC.

Conclusion

VLC media player, Perfect Player, and Kodi are the perfect choices for streaming IPTV content on Computers or Laptops and are very easy to install. There are other applications available on the internet, however, we highly recommend these mentioned apps for ease of access and a better experience.

Smart TV’s Operating systems 

SIPTV is the most recommended app to use on smart TVs such as LG, Samsung, and Sony. Currently, SIPTV (Smart IPTV App) is the most used application for streaming IPTV channels on Smart TV with frequent updates and a user-friendly interface.

Other than SIPTV, we are also going to mention other apps as well, such as Kodi on Smart TV which will be a great addition to your home entertainment unit.

All you need is a Smart TV and an internet connection. This application also supports EPG as well as Picons and grouping. In order to have EPG, Picons, and channel groups , the M3U file or URL that you are uploading to this application, must be m3u with options.

SIPTV (Smart IPTV App)

With the help of this application, no matter what brand of Smart TV you are using this app works on all Smart TVs such as LG, Samsung, and Sony. You can play your OTT and IPTV streams on your Smart TV.

The most popular way is by downloading an application called SIPTV App (Smart IPTV App) on your TV and uploading your M3U playlist with your TV Mac address on the SIPTV website. How to setup IPTV on Smart TV via Smart IPTV App(SIPTV)?

Kodi on Smart TV

Many TVs offer different operating systems and user interfaces that might not match the requirements of Kodi. However, if your Smart TV doesn’t support Android, don’t worry, there are a few other options so that you can enjoy watching IPTV channels on your Smart TV via Kodi. How to use Kodi.

The main reason to have Kodi on your Smart TV is to take advantage of all the great Kodi add-ons base which we will discuss ahead. Kodi is an Open Source application, this means any developer can have access to its source code and develop an add-on on it in order to add new functionalities to the App.
Due to some restricted policies around Kodi and IPTV streaming in general, some add-ons must be installed through third-party repositories and added to your Kodi app. How to install Kodi on Smart TV?.

Smart STB app on Smart TV

Smart STB is an Android app which can be installed on Samsung and LG smart TVs. This app enables you to have IPTV service on a portal just like MAG setup boxes with all characteristics that can be expected from MAG and Stalker Portal. How to install the Smart STB app on Smart TV?

IPTV on SS IPTV

SS IPTV is a free multi-purpose player for streaming media in the local network or through the internet. The app is compatible with the services of hundreds of IPTV operators. User’s own IPTV playlists are also supported. How to setup IPTV on SS IPTV?

How to add an M3U playlist to Smart STB?

To learn how to activate and install the Smart STB app, Please visit the article and then follow the steps described in How to Add M3U playlist to Smart STB.

Conclusion

We tried to explain the best ways to watch IPTV on Smart TV in this section. There are other applications available on different Smart TVs, however, we don’t recommend using those apps since these apps that we mentioned have proven their worth over the past few years. If your TV supports Android then you have tons of other options such as Perfect Player, GSE app, and … The list goes on. How to set up IPTV using GSE IPTV App?

Smartphones, Tablets and Setup boxes (Android, iOS, Windows Phone)

Depending on the Operating System, Kodi for Android and GSE app for iOS is the best choice for streaming IPTV channels on your phone. However, we are going to discuss which app is the best choice for streaming Live channels on your Smartphones based on the Operating System of the device.

Kodi (Smartphones, Tablets, and Setup boxes)

Kodi is relatively available on all the setup boxes such as Nvidia Shield, Amazon FireTV, RaspberryPi, Smartphones, Xbox One, Smart TVs, and basically all the devices that have access to Google Player Store or Apple Store.

Android

There is a lot of IPTV application available on the Android Operating System, however, many of those application doesn’t function very well and are most likely not optimized on most Smartphones. In this section, we are going to introduce the best IPTV Apps on Android.

IPTV EXTREME PRO

It’s a very handy player and has so many performance tuning options which are a great addition and benefit compared to other applications. First, you’ll need to add a Playlist by inserting an m3u link or selecting a previously saved playlist file. What is M3U?

Along with other IPTV applications on Android that we are going to mention, the IPTV EXTREME PRO app is one of the most recommended ones. How to setup IPTV via IPTV EXTREME?

IPTV Smarters App

IPTV Smarters is an Android Application based on Xtream Code that provides your esteemed customers the facility to watch Live TV, VOD, Series, and TV Catchup on their Android Devices (Mobiles, Android Boxes, Fire TV Stick, etc.).

In order to have IPTV channels on this, you will need to enter your UsernamePassword, and Server URL that is provided by your IPTV service provider. How to setup IPTV using IPTV Smarters app?

GSE IPTV App

GSE SMART IPTV is a comprehensive user-defined Advanced IPTV solution for live and non-liveTV streaming. With a built-in strong player that supports most formats including M3U with options.

GSE is another great addition to this list and will definitely serve all your needs for your IPTV experience. How to setup IPTV using GSE IPTV App?

Perfect Player

Perfect Player is an Android application that simulates a set-top box which can be used for streaming IPTV channels on your favorite devices such as tablets, smartphones, and Smart TVs. Please note, that this application doesn’t include any IPTV channels. In order to add IPTV channels, you must add your own m3u playlists inside the settings section. What is the M3U list? Perfect Player is also available on iOSLinux, and Microsoft Windows. How to setup IPTV on Perfect Player?

Android STB Emulator

This App is intended to be used by expert users. To operate accurately it needs to be configured first and if you’ve never configured IPTV boxes it may be confusing for you to configure it.

Please note, that by making a simple mistake during your configuration, the App will become unusable. In this tutorial, we are going to show you how to use the STB emulator on your device in order to watch IPTV. How to setup IPTV on Android devices using STB Emulator?

“IPTV” Application

Watch IPTV from your Internet service provider or free live TV channels from any other source on the web the “IPTV” Application (This is the name of the app and it is not referring to the IPTV industry).  If you are utilizing a VLC media player to watch TV on your PC then this app is highly recommended to you. How to setup IPTV on “IPTV” Application?

IPTV on SS IPTV

SS IPTV is a free multi-purpose player for streaming media in the local network or through the internet. The app is compatible with the services of hundreds of IPTV operators. User’s own IPTV playlists are also supported. How to setup IPTV on SS IPTV?

IPTV on ProgTV

ProgTV formerly known as HyppTV, is a simple but handy and comprehensive application for streaming IPTV channels and listening to radio channels over the Internet or local network. How to set up IPTV on ProgTV?

iOS

Some of the iOS applications are also available on Android such as the GSE app or IPTV Smarters app and we are going to mention some of the great applications that you can use on an iOS platform.

IP Television App

IP Television enables you to stream universal channels, worldwide broadcasters, and VOD on your iPhone and iPad (and on your Apple TV). Wherever you are! You just require an internet connection!

You can build or upload all the channels and playlists with IP Television.
IP Television has an intuitive interface and enables you to simply control and refresh your playlists. How to setup IPTV using IP Television App?

Cloud Stream IPTV

Cloud Stream IPTV Player is a free program for iPhone that relates to the category of IPTV streaming and has been produced by Giovanny Aranda. This program is accessible in French, English, Italian, and Spanish languages. What is internet streaming?

Watch the TV IPTV from your ISP or any other TV Internet source from your iPhone or iPad with EPG and the ability to create a favorites list from your selected channels. How to set up IPTV using Cloud Stream IPTV?

GSE IPTV App

GSE SMART IPTV is a complete user-defined advanced IPTV solution for your iOS device. With a built-in strong player that supports most formats including M3U with options.

GSE Player is also available on Android. How to setup IPTV using GSE IPTV App?

IPTV on iOS using rIPTV

With the help of this application, you can enjoy all your multimedia content on a single device in a single application. rIPTV brings streaming and on-demand television to your iOS device. Intuitive and easy to use. How to setup IPTV using rIPTV?

IPTV on iOS using the IPTV Smarters app

IPTV Smarters is an iOS Application based on Xtream Codes that provides your esteemed customers the facility to watch Live TV, VOD, Series & TV Catchup on their iOS Devices (Mobiles, iOS Boxes, etc.). How to set up IPTV using the IPTV Smarters app?

Conclusion

There you have it. We tried to explain all the five main Operating systems for IPTV streaming in a comprehensive article. If you think we missed out on anything else, feel free to discuss it with us in the comments section down below and help us improve the quality of our articles. Thank you in advance.

Developed by iptvhelpcenter.net

How to setup IPTV on GSE via Xtream-Codes API?

In this tutorial, we are going to show you how to bring IPTV channels to your GSE SMART IPTV App. GSE is a comprehensive user-defined Advanced IPTV solution for live and non-liveTV streams. With a built-in strong player that supports most formats including M3U with options.
It is available in both Android and iOS devices.

We will set IPTV in GSE App using Xtream-Codes API here, also there is another way to set IPTV in GSE App.
How to set up IPTV on GSE via Remote Playlist?

The Advantages of using Xtream-Codes API to setup GSE App:

By using Xtream-Codes API you can add EPG information easily, No need to add the EPG url.
Also, EPG auto update is available.

If the IPTV provider presents a Catch-up feature, you will have this option in Xtream-Codes API like the MAG portal system.

You can download this app via the link below:

Android devices:
https://apkpure.com/gse-smart-iptv/com.gsetech.smartiptv

iOS:
https://itunes.apple.com/us/app/gse-smart-iptv/id1028734023?mt=8

How to add IPTV channels to GSE using Xtream-Codes API

Step 1: Start by downloading the GSE IPTV App from the Google Play Store and on the top left you have the options (three lines).
Click on “Xtream-Codes API”.

Step 2: On the down right corner click on the red circle.

Step 3: Select a name for the IPTV list, you can choose any name for example “MY IPTV”.
Enter the Server nameUsername, and Password, you can find all these details in the M3U URL which your IPTV provider sends.
After finishing entries click on “Add”.
How to find the Server Address, Username and Password?

Step 4: Now you will find your “IPTV list” in the menu, click on it.

Step 5: Wait for the channels to be added to your application and this might take a little time depending on which countries or channels groups your M3U file contains.
You will see the LIVE channels and VOD list.

Step 6: By clicking on LINE you will see the channel groups.
Select the channel that you want to watch and click on “Play”.

Now your GSE Android app is ready for streaming IPTV channels on your Android device.

How to load EPG in GSE using Xtream-Codes API

Step 1: You can easily add EPG in GSE by clicking on “INSTALL EPG DATA”

Step 2: Wait until the EPG data downloads after that you can see the EPG list by clicking on “ELECTRONIC PROGRAM GUIDE”.

Developed by iptvhelpcenter.net

How to setup IPTV on GSE via Remote Playlist?

In this tutorial, we are going to show you how to bring IPTV channels to your GSE SMART IPTV App. GSE is a comprehensive user-defined Advanced IPTV solution for live and non-liveTV streams. With a built-in strong player that supports most formats including M3U with options.
It is available on both Android and iOS devices.

We will set IPTV in the GSE App using Remote Playlists here, also there is another way to set IPTV in the GSE App.
How to set up IPTV on GSE via Xtream-Codes API?

You can download this app via the link below:

Android devices:
https://apkpure.com/gse-smart-iptv/com.gsetech.smartiptv

iOS:
https://itunes.apple.com/us/app/gse-smart-iptv/id1028734023?mt=8

How to add IPTV channels to GSE

Step 1: Start by downloading the GSE IPTV App from the Google Play Store and in the menu click on Remote Playlist.

On the down right corner click on the red circle, then Add M3U URL.

Step 2: Now select a name for your playlist paste your M3U URL and click on “ADD“.

Step 3: Now click on the playlist you just added in order to see the channel groups.

Step 4: Now wait for the channels to be added to your application and this might take a little time depending on which countries or channels groups your M3U file contains.

Step 5: Now select the channel that you want to watch and click on “Play“.

How to setup IPTV on GSE via Remote Playlist

Now your GSE Android app is ready for streaming IPTV channels on your Android device.

Features

  • Chromecast
  • XTREAM-CODES API
  • API support automatic live and VOD playlist including EPG and movie info.
  • EPG XMLTV FORMAT (local and remote file support, XML, zip, gzip formats)
  • Parental control
  • Copy and paste M3U contents
  • Dynamic language switching (31 LANGUAGE)
  • Multiple themes
  • Built-in player supports all popular formats including RTMP tokens

Live stream IPTV support
✔ HTTP, HSL, M3U8, MMS, RTSP and more
✔ RTMP supports all options including secure tokens

Developed by iptvhelpcenter.net

How to setup IPTV on IPTV Extreme?

In this Tutorial, we will explain how to set up the IPTV Extreme Pro app on your Android device. It’s a very handy player and has so many performance tuning options. First, you’ll need to add a Playlist by inserting an m3u link or selecting a previously saved playlist file. What is M3U?

Download the IPTV Extreme or IPTV Extreme pro from the google play store.

  1. Free Version – play.google.com/store/apps/details?id=com.pecana.iptvextreme&hl=en_GB 
  2. Paid Version – play.google.com/store/apps/details?id=com.pecana.iptvextremepro&hl=en_GB 

How to add IPTV channels to IPTV EXTREME PRO

Step 1: After downloading the version of your choice, start the application and wait for it to load up.

Step 2: Now click on the three dots in the upper right corner of your screen.

Step 3: Now select “Playlists” as depicted via a red arrow.

Step 4: Now click on “ADD PLAYLIST” and proceed to the next section.

Step 5: Now select “FILE OR LINK TO PLAYLIST“.

Step 6: Now you must enter a name for your playlist and then insert your M3U URL which you can obtain from an IPTV provider and click on “OK“.

Step 7: Now you must wait for the app to load the playlist. This might take a few minutes.

Step 8: Now click on the “OK” and proceed to the next step.

Step 9: Now click on the playlist you just added.

Step 10: Now you can select each channel group as depicted via red arrows and start streaming.

IPTV EXTREME PRO features

  • Integrated Player (Advanced & Light)
  • Chromecast Support (Beta)
  • Parental Control
  • Remote Controller support
  • Backup / Restore Settings
  • M3U playlists support
  • Multi EPG support (TV Guide)
  • Auto EPG update
  • EPG alias management
  • All the EPG providers are included
  • Picons support in different size
  • Ability to download On Demand Programs!
  • Ability to record Live Streaming within a time limit!
  • More than 10 Themes are available!
  • Time Recording
  • Timers Management
  • Autostart On Boot Function
  • Set Memo function for Events on TV Guide
  • Search for Similar Events on TV Guide
  • Sliding EPG time

Developed by iptvhelpcenter.net

How to setup IPTV on iOS via Cloud Stream IPTV?

Cloud Stream IPTV Player is a free program for iPhone that relates to the category of IPTV streaming and has been produced by Giovanny Aranda. This program is accessible in French, English, Italian, and Spanish languages.

Watch the TV IPTV from your ISP or any other TV Internet source from your iPhone or iPad with EPG and the ability to create a favorites list from your selected channels.

How to add IPTV channels to Cloud Stream IPTV Player

Step 1: Start by downloading the app from the app store via this URL:
https://itunes.apple.com/us/app/cloud-stream-iptv-player/id1138002135#?platform=ipad 
and install it on your iOS device.

Step 2: After downloading the app, click on the 3 lines and then select the + sign just as depicted in the below picture.

Step 3:  You will then be offered with a new screen, click on “LOAD M3U FILE” and add the M3U link that you received from your IPTV distributor. What is M3U?

Step 4: After your M3U playlist is loaded, a new screen will be displayed, enter a name (any name) for the playlist and then pick your country (Choosing the country will also help with setting up the EPG).

Step 5: You can also check the EPG information regarding each channel from the EPG tab.

Features of Cloud Stream IPTV Player

• Play IPTV
• Streaming for Internet channels
• Play-multicast streams through a UDP proxy (the proxy must be configured in your local network)
• Support M3U and XML, ability to add playlists from the file system device, via the Internet or from the clipboard.
• Channel information and logo is available
• Support for JSON format lists with extension W3U and WISE
• Programming Guide EPG
• A few video servers are supported

Additional features:
– Share lists between devices using Airdrop, mail, messages, or any other application installed on the device.
– Favorites.
– Theme Light and Dark.
– Parental Lock on the player to keep children on the player.
– If the channel allows, switch subtitles and secondary audio.
– If the m3u list contains groups these will be displayed in the application.
– Schedule reminders for broadcast programs using the bell in the programming grid

Developed by iptvhelpcenter.net

How to setup IPTV on IP Television App?

IP Television enables you to stream universal channels, worldwide broadcasters, and VOD on your iPhone and iPad (and on your Apple TV) and also Android devices. Wherever you are! You just require an internet connection!

You can download this app via the link below:

Android:
https://play.google.com/store/apps/details?id=tv.iptelevision.iptv

iOS:
https://apps.apple.com/app/ip-television-iptv-m3u/id884206090

How to bring IPTV channels to IP Television App

Step 1: Open the IP Television App.
You have to Option to add the IPTV list in the IP Television App.
Manual Load Channels” and “Xtream-Codes Account“.
We offer Xtream-Codes because you will have more features

In this article, we will show both methods.

Step 2: If you select “Manual Load Channels“.
You will see the below setting.
Add any name you want for example “IPTV Playlist” in the first box.
In the second box enter the M3U url which you get from your IPTV provider.
The progressive IPTV providers give you a dashboard in which you can access your M3U URL in dashboard.

If you select “Xtream-Codes Account“.
Add any name you want in the first box.
On the third and Fourth boxes, enter the “Username” and the “Password” of your M3U line and in the second box the server URL which can also be found on your M3U line.
The progressive IPTV providers give you a dashboard in which you can access your M3U URL in the dashboard.
How to find the Server Address, Username, and Password?

Step 3: Now click on the playlist you just added in order to see the channel groups.

Step 4: Now select the channel that you want to watch and Enjoy!

Features

Comfortable and Handy
IP Television is very straightforward to utilize and has several features.
– Inject numerous playlists and control them efficiently.
– Add channels in 4 separate forms.
– Apply the Electronic Program Guide or EPG.
– And many more…

You can build or upload all the channels and playlists with IP Television.
IP Television has an intuitive interface and enables you to simply control and refresh your playlists.

IP TELEVISION FEATURES:
– Start and control your channel playlists.
– Utilize the menu bar to watch Video on Demand.
– Watch your desired channels.
– Arrange a channel list into sections.

Developed by iptvhelpcenter.net

How to setup Plex on Apple TV?

Whether we’re discussing Apple TV, Chromecast, or Roku boxes, the big thing these days is on-demand streaming content. Note: This guide is for the official Plex application for Apple’s TVOS, which limits it to the 4th generation Apple TV and above. What is Apple TV?

How to Install Plex On Your Apple TV

The user-friendly features of the whole Plex experience really shine through in the installation period. Not only is the Apple TV Plex app elaborate, but the Plex team has made the method of linking the app to your Plex system absolutely painless. Install IPTV on Apple TV via IP Television App.

Step 1: To start, fire up your Apple TV and head to the App Store by choosing in on the main screen, as marked below.

Step 2: Select the search option in the App Store application and search for “Plex”. Be sure to select plain old “Plex” and not any of the similar-sounding applications like “Simple X – for Plex”.

Step 3: In the detailed view, as seen below, select the “Install” button.

Step 4: Once the installation is complete the “Install” button will turn to “Open”. Click it again to launch the Plex application.

After the Plex splash screen, you’ll be prompted to log into your Plex account. The app will give you a security code, like so:

Step 5: Take that four-character alpha-numeric code visit Plex.tv/link and enter the code to link the Apple TV Plex app to your Plex account. You’ll receive nearly simultaneous confirmations on both the website and the Apple TV app thanking you for using Plex.

After the confirmation screen, you’ll see all the Plex media servers linked to your account. In the screenshot below you can see our one very cleverly named media server “plexmediaserver_1”. Select the server to access the media on it.

Select the server you wish to connect to and the steps are over, you can use Plex on your Apple TV. Feel free to submit your questions and feedback and help us to improve the quality of our articles and content.

Developed by iptvhelpcenter.net

How to setup IPTV on Apple TV via iPlayTV App?

This app is only available on Apple TV and you can use this app to watch your favorite IPTV playlist in the new Apple TV. What is Apple TV?

Adding IPTV channels to the iPlayTV app

Step 1: Start by downloading the iPlayTV App from the App Store and click “Add Playlist”.

Step 2: Go to the “Xtream Server” and select to proceed to the next section.

Step 3: Now you need to fill in the entries as instructed below then click on “Save“.

Playlist name: You can place any name, e.g. MY IPTV
Server Url: Here you must apply the server name provided by your IPTV distributor.
Username: Enter the username provided by your IPTV distributor.
Password: Enter the password provided by your IPTV distributor.

You can find all these mentioned details inside your M3U URL.
Where to find the username, password, and the server name?

Now your iPlayTV is ready for streaming IPTV channels on your Apple TV.

If you think need further help, feel free to discuss it with us in the comments section below.

Features:

– Multi playlists
– Search for channels in all playlists
– Favorites
– Favorites reorder
– Channel preview (Must be enabled in settings)
– Automatic find channel logos using a channel name
– Full Electronic Program Guide support
– Easy to use and simple interface
– Supports most of the IPTV playlists
– Based on VLC and Apple player (supports most of the stream codecs)
– Supports EPG URLs with gzip/tar content
– Supports multiple audio/subtitles tracks
– Airplay 2 (when the Apple TV comes from sleep you need to select it again)
– Xtream Codes support

Developed by iptvhelpcenter.net

How to setup IPTV on rIPTV?

With the help of this application, you can enjoy all your multimedia content on a single device in a single application. rIPTV brings streaming and on-demand television to your iOS and Android devices. Intuitive and easy to use. What is Internet streaming?

rIPTV adds an electronic program guide to all your channels and let you find what you’re watching at the moment. It also lets you find showtimes, watch trailers, browse photos, and display rating and information on all your movies. What is video on demand?

Where to download?

You can download this amazing application from iTunes via the URL below:
Android:
https://play.google.com/store/apps/details?id=areaengineering.android.mytv
iOS:
https://itunes.apple.com/be/app/riptv/id1060510958#?platform=iphone

How to setup IPTV on rIPTV app

Step 1: Start by clicking on the “+” button at the bottom of the screen.

Step 2: Now on the first field insert a name for your Playlist and on the second field insert your M3U URL and then click on “Add“. What is M3U?

Step 3: After inserting the M3U URL you can see a “Loading” sign and after the loading is finished you can start watching your IPTV channels on your device.

Main features of rIPTV

  • Turn your iOS device into a portable TV and watch your favorite channels and on-demand movies anywhere you go
  • Multiple IPTV playlists
  • iPad Multitasking support
  • Infinite channel scrolling
  • Channel Icons
  • Auto Group Channel
  • Upload and refresh playlists without reload
  • Easy to use beautiful interface
  • Play all files not only live streaming
  • Enjoy EPG (Electronic Program Guide) on all your channel
  • Play/Pause Live TV
  • Video Scrolling
  • Enjoy information about live programs and on-demand movies or TV series
  • Movies description and information based on the most popular database on the web (IMDB)
  • Choose what you want to see before watching it: enjoy rating and movie trailers
  • Based on VLC
  • Favourite Channels
  • Enjoy 3D Touch Functions on supported devices
  • Use Today Widget
  • Add remember: never lose your favorite events
  • Find your program directly on Spotlight
  • Support iOS9 +

Let us know in the comments section below about your opinion and feedback concerning this article and help us improve the quality of our articles. Thank you in advance.

Developed by iptvhelpcenter.net

Windows

How to setup IPTV on IPTV Smarters in computer?

IPTV Smarters is one of the best IPTV applications that was available on Android and iOS devices.
Now there is good news for Windows users, IPTV Smarters is here.
You can download IPTV Smarters for different platforms on their website:
IPTV Smarters website

IPTV Smarters Pro

IPTV Smarters provides you with many different features like Live TVMovies, and Series. But one the the interesting options you have on this app is Catch Up.
Catch-up was only available on MAG boxes before but now some rare applications give you this option, and one of the best ones is IPTV Smarters.
With catch up you will never lose your favorite program.
What is the Catch?

How to add IPTV channels to IPTV Smarters on Windows

Step 1: As we mentioned on top you can download IPTV Smarters directly from their website, here it’s the direct download URL:
https://www.iptvsmarters.com/#downloads

Step 2: After installing and launching the software, please try to “ADD NEW USER”.

How to setup IPTV on IPTV Smarters in computer

Step 3: Now you need to enter login details. Select and enter “Any name” you want in the first blank. Fill UsernamePassword, and Server URL easily from the M3U URL.
The progressive IPTV providers give you a dashboard in which you can access your M3U URL in dashboard.
How to find Server Address, Username, and Password?

Click on ADD USER.

How to setup IPTV on IPTV Smarters in computer

Step 4: After login, easily click on “LIVE TV”.

In this step, you can see the expiration date of your subscription at the bottom of the page.

How to setup IPTV on IPTV Smarters in computer

Step 4: Select the bouquet and Play the desired channels.

How to setup IPTV on IPTV Smarters in computer
How to setup IPTV on IPTV Smarters in computer

Enjoy!

IPTV Smarters features

  • Live, Movies, Series & TV
  • Catchup Streaming
  • Support: EPG
  • Parental Control Integrated for each category
  • Built-in powerful player
  • Support: Playing with External Players
  • Attractive & Impressive Layout and More User-Friendly
  • Support: Dynamic language switching

Please feel free to comment below if need any further help.
What do you think about IPTV Smarters?
Please share your experiences with us.

Developed by iptvhelpcenter.net

How to setup IPTV on VLC media player?

VLC is one of the most used applications for streaming IPTV channels. The VLC media player is a free and open-source, portable, cross-platform media player and streaming media server produced by the VideoLAN project. VLC is available for desktop operating systems and mobile platforms, such as AndroidiOSTizenWindows 10 Mobile, and Windows Phone.

In this tutorial, we will show you how to record Live programs on VLC.  and it this guide we will show you how to set up IPTV channels via VLC on your computer. How to record live programs on the VLC media player?

How to add IPTV channels to VLC

Download the VLC media player from:
http://www.videolan.org/vlc/index.nl.html
and follow the steps and Install VLC Media Player.

You can download it for different Operating Systems here:

After you download and install VLC based on your Operating system you can start setup steps.

Step 1: When the application is opened press on “Media“.

Step 2: Click on the “Open network stream“.

Step 3: Enter the M3U URL provided by your IPTV distributor and press “Play“.

Note: The progressive IPTV providers give you a dashboard in which you can generate your M3U URL in the dashboard.

Step 4: Now your playlist is loaded, Press the combination between CTRL+L to bring up the playlist.

Here you can choose or search for your desired channel and start watching Live TV…

How to optimize the VLC player for watching IPTV?

How to change the channel’s audio on VLC?

Please do not hesitate to ask your question in the comments if you need any further help.

Developed by iptvhelpcenter.net

Softwares you need for watching IPTV

According to the Operating System of your device, you can use these kinds of software/apps: VLC media player (Windows Microsoft-Linux-Macintosh OS-Android), Perfect Player (Android), KODI, SIPTV (Smart TVs), and Enigma2 (Linux) MAG box, gaming consoles such as PS4 and Xbox, Smartphones. Depending on the OS of your phone, you can use the GSE App or IP Television App for iOS and Perfect Player and Kodi on Android phones.

Computers (Windows, Mac OS, Linux)

Based on many feedbacks around the internet, VLC is the most commonly used application for streaming IPTV channels on Computers. However, we are going to mention a few other useful applications as well.

In addition to streaming service, PCs can be set up to use digitally downloaded media as well as playback DVD and Blu-ray if you have the appropriate hardware. The best part is that the computer can also be a hub for digital content. You can also take your Laptop with you anywhere you want and watch live streams with a simple internet connection. This way you never miss a TV show or a big sports event.

VLC media player (Windows, Mac OS, Linux)

The most commonly used Application on these mentioned operating systems is the VLC media player. VLC offers the best solution for IPTV usage and is compatible with most of the hardware and operating systems. How to setup IPTV on VLC?

Perfect Player (Windows, Mac OS)

Perfect Player is an Android application that simulates a set-top box which can be used for streaming IPTV channels on your favorite devices such as tablets, smartphones, and Smart TVs. Please note, that this application doesn’t include any IPTV channels. In order to add IPTV channels, you must add your own m3u playlists inside the settings section. What is the M3U list
Perfect Player is available on AndroidiOSLinux, and Microsoft Windows. How to add IPTV channels to Perfect Player on Computers?

MyIPTV Player

This is an exceptional media player with EPG to play your IPTV channels on your Windows Phone, Windows 10, and Xbox One.  You can simply load your M3U playlist from storage or remote source and you are good to go. MyIPTV Player on Windows

Kodi (Windows, Mac OS, Linux)

Kodi is an open-source media player which is a free application that functions as a digital media center. This application enables you to play your media, and cast it between various devices, from a primary location to other devices. How to set up IPTV on Kodi for Computers? You can use Kodi on most of operating systems such as Android, Microsoft Windows, Linux, iOS, and devices such as Amazon FireTV, Smartphones, Apple TV, Xbox, and PC.

Conclusion

VLC media player, Perfect Player, and Kodi are the perfect choices for streaming IPTV content on Computers or Laptops and are very easy to install. There are other applications available on the internet, however, we highly recommend these mentioned apps for ease of access and a better experience.

Smart TV’s Operating systems 

SIPTV is the most recommended app to use on smart TVs such as LG, Samsung, and Sony. Currently, SIPTV (Smart IPTV App) is the most used application for streaming IPTV channels on Smart TV with frequent updates and a user-friendly interface.

Other than SIPTV, we are also going to mention other apps as well, such as Kodi on Smart TV which will be a great addition to your home entertainment unit.

All you need is a Smart TV and an internet connection. This application also supports EPG as well as Picons and grouping. In order to have EPG, Picons, and channel groups , the M3U file or URL that you are uploading to this application, must be m3u with options.

SIPTV (Smart IPTV App)

With the help of this application, no matter what brand of Smart TV you are using this app works on all Smart TVs such as LG, Samsung, and Sony. You can play your OTT and IPTV streams on your Smart TV.

The most popular way is by downloading an application called SIPTV App (Smart IPTV App) on your TV and uploading your M3U playlist with your TV Mac address on the SIPTV website. How to setup IPTV on Smart TV via Smart IPTV App(SIPTV)?

Kodi on Smart TV

Many TVs offer different operating systems and user interfaces that might not match the requirements of Kodi. However, if your Smart TV doesn’t support Android, don’t worry, there are a few other options so that you can enjoy watching IPTV channels on your Smart TV via Kodi. How to use Kodi.

The main reason to have Kodi on your Smart TV is to take advantage of all the great Kodi add-ons base which we will discuss ahead. Kodi is an Open Source application, this means any developer can have access to its source code and develop an add-on on it in order to add new functionalities to the App.
Due to some restricted policies around Kodi and IPTV streaming in general, some add-ons must be installed through third-party repositories and added to your Kodi app. How to install Kodi on Smart TV?.

Smart STB app on Smart TV

Smart STB is an Android app which can be installed on Samsung and LG smart TVs. This app enables you to have IPTV service on a portal just like MAG setup boxes with all characteristics that can be expected from MAG and Stalker Portal. How to install the Smart STB app on Smart TV?

IPTV on SS IPTV

SS IPTV is a free multi-purpose player for streaming media in the local network or through the internet. The app is compatible with the services of hundreds of IPTV operators. User’s own IPTV playlists are also supported. How to setup IPTV on SS IPTV?

How to add an M3U playlist to Smart STB?

To learn how to activate and install the Smart STB app, Please visit the article and then follow the steps described in How to Add M3U playlist to Smart STB.

Conclusion

We tried to explain the best ways to watch IPTV on Smart TV in this section. There are other applications available on different Smart TVs, however, we don’t recommend using those apps since these apps that we mentioned have proven their worth over the past few years. If your TV supports Android then you have tons of other options such as Perfect Player, GSE app, and … The list goes on. How to set up IPTV using GSE IPTV App?

Smartphones, Tablets and Setup boxes (Android, iOS, Windows Phone)

Depending on the Operating System, Kodi for Android and GSE app for iOS is the best choice for streaming IPTV channels on your phone. However, we are going to discuss which app is the best choice for streaming Live channels on your Smartphones based on the Operating System of the device.

Kodi (Smartphones, Tablets, and Setup boxes)

Kodi is relatively available on all the setup boxes such as Nvidia Shield, Amazon FireTV, RaspberryPi, Smartphones, Xbox One, Smart TVs, and basically all the devices that have access to Google Player Store or Apple Store.

Android

There is a lot of IPTV application available on the Android Operating System, however, many of those application doesn’t function very well and are most likely not optimized on most Smartphones. In this section, we are going to introduce the best IPTV Apps on Android.

IPTV EXTREME PRO

It’s a very handy player and has so many performance tuning options which are a great addition and benefit compared to other applications. First, you’ll need to add a Playlist by inserting an m3u link or selecting a previously saved playlist file. What is M3U?

Along with other IPTV applications on Android that we are going to mention, the IPTV EXTREME PRO app is one of the most recommended ones. How to setup IPTV via IPTV EXTREME?

IPTV Smarters App

IPTV Smarters is an Android Application based on Xtream Code that provides your esteemed customers the facility to watch Live TV, VOD, Series, and TV Catchup on their Android Devices (Mobiles, Android Boxes, Fire TV Stick, etc.).

In order to have IPTV channels on this, you will need to enter your UsernamePassword, and Server URL that is provided by your IPTV service provider. How to setup IPTV using IPTV Smarters app?

GSE IPTV App

GSE SMART IPTV is a comprehensive user-defined Advanced IPTV solution for live and non-liveTV streaming. With a built-in strong player that supports most formats including M3U with options.

GSE is another great addition to this list and will definitely serve all your needs for your IPTV experience. How to setup IPTV using GSE IPTV App?

Perfect Player

Perfect Player is an Android application that simulates a set-top box which can be used for streaming IPTV channels on your favorite devices such as tablets, smartphones, and Smart TVs. Please note, that this application doesn’t include any IPTV channels. In order to add IPTV channels, you must add your own m3u playlists inside the settings section. What is the M3U list? Perfect Player is also available on iOSLinux, and Microsoft Windows. How to setup IPTV on Perfect Player?

Android STB Emulator

This App is intended to be used by expert users. To operate accurately it needs to be configured first and if you’ve never configured IPTV boxes it may be confusing for you to configure it.

Please note, that by making a simple mistake during your configuration, the App will become unusable. In this tutorial, we are going to show you how to use the STB emulator on your device in order to watch IPTV. How to setup IPTV on Android devices using STB Emulator?

“IPTV” Application

Watch IPTV from your Internet service provider or free live TV channels from any other source on the web the “IPTV” Application (This is the name of the app and it is not referring to the IPTV industry).  If you are utilizing a VLC media player to watch TV on your PC then this app is highly recommended to you. How to setup IPTV on “IPTV” Application?

IPTV on SS IPTV

SS IPTV is a free multi-purpose player for streaming media in the local network or through the internet. The app is compatible with the services of hundreds of IPTV operators. User’s own IPTV playlists are also supported. How to setup IPTV on SS IPTV?

IPTV on ProgTV

ProgTV formerly known as HyppTV, is a simple but handy and comprehensive application for streaming IPTV channels and listening to radio channels over the Internet or local network. How to set up IPTV on ProgTV?

iOS

Some of the iOS applications are also available on Android such as the GSE app or IPTV Smarters app and we are going to mention some of the great applications that you can use on an iOS platform.

IP Television App

IP Television enables you to stream universal channels, worldwide broadcasters, and VOD on your iPhone and iPad (and on your Apple TV). Wherever you are! You just require an internet connection!

You can build or upload all the channels and playlists with IP Television.
IP Television has an intuitive interface and enables you to simply control and refresh your playlists. How to setup IPTV using IP Television App?

Cloud Stream IPTV

Cloud Stream IPTV Player is a free program for iPhone that relates to the category of IPTV streaming and has been produced by Giovanny Aranda. This program is accessible in French, English, Italian, and Spanish languages. What is internet streaming?

Watch the TV IPTV from your ISP or any other TV Internet source from your iPhone or iPad with EPG and the ability to create a favorites list from your selected channels. How to set up IPTV using Cloud Stream IPTV?

GSE IPTV App

GSE SMART IPTV is a complete user-defined advanced IPTV solution for your iOS device. With a built-in strong player that supports most formats including M3U with options.

GSE Player is also available on Android. How to setup IPTV using GSE IPTV App?

IPTV on iOS using rIPTV

With the help of this application, you can enjoy all your multimedia content on a single device in a single application. rIPTV brings streaming and on-demand television to your iOS device. Intuitive and easy to use. How to setup IPTV using rIPTV?

IPTV on iOS using the IPTV Smarters app

IPTV Smarters is an iOS Application based on Xtream Codes that provides your esteemed customers the facility to watch Live TV, VOD, Series & TV Catchup on their iOS Devices (Mobiles, iOS Boxes, etc.). How to set up IPTV using the IPTV Smarters app?

Conclusion

There you have it. We tried to explain all the five main Operating systems for IPTV streaming in a comprehensive article. If you think we missed out on anything else, feel free to discuss it with us in the comments section down below and help us improve the quality of our articles. Thank you in advance.

Developed by iptvhelpcenter.net

How to setup IPTV on Kodi?

Kodi is an open-source media player which is a free application that functions as a digital media center. This application enables you to play your media, and cast it between various devices, from a primary location to other devices. You can use Kodi on most of operating systems such as Android, Microsoft Windows, Linux, iOS, and devices such as Amazon FireTV, Smartphones, Apple TV, Xbox, and PC.

How to bring IPTV channels to Kodi

Installing Kodi is astonishingly simple. All you need to do is to download Kodi, double-click on the Kodi image, and then perform the setup wizard. It’s that simple! After Kodi is installed, you can download a big variety of add-ons to improve the experience. Here we will show you how to install IPTV on Kodi.

Step 1: Start by downloading Kodi based on your operating system:
https://kodi.tv/download.
In this case, we select “Windows“.

*Please note, here we guide how to setup IPTV in Kodi in Windows but the installation process is very similar in all operating systems.

Step 2: Select 64 Bit or 32 Bit based on your operating system.

Step 3: After install and open it, click on “Add-ons“.
What is Kodi Add-on?

Step 4: Now click on “Download” then select “PVR clients“.

Note: We are going to download and install the PVR add-on here, after installing no need to go to the “Download“.
You can find the installed add-ons “My add-ons

Step 5: Select “PVR IPTV Simple Client“.

Step 6: Now click on “Install“.

Step 7: After installing “PVR IPTV Simple Client” head back to “My add-ons” then “PVR Clients” and run the add-on.
Now click on “Configure

Step 8:  Now select “M3U Play List URL”.

Step 9: Enter the M3U URL provided by your IPTV distributor and click “OK“.

Note: The progressive IPTV providers give you a dashboard which you can generate your M3U url in dashboard.

How to add EPG

Step 10: Now go to “EPG Settings” and click on “XMLTV URL” for EPG. What is EPG?

Step 11: Now paste your EPG URL and click “OK“.
You can get the EPG URL from your IPTV provider.

Step 12: Click on “Enable“.

Note: After you enable the add-on you will see “Disable”, this means the add-on enabled so do NOT to click on “Disable” again.

Step 13: Head back to “TV” and click on “Channels“.

Step 14: Wait until you see the notification about updating channels and the installation process is over.

Well done, you have IPTV channels now.


Conclusion

Kodi is able to play virtually every media content that you can imagine and is very customizable. Kodi allows you to change the color, skin of the user interface based on your tasteful preferences. You can also download tons of various add-ons to make your entertainment world even more remarkable.

Please do not hesitate to ask your question in the comments if you need any further help.

Developed by iptvhelpcenter.net

Kodi on Smart TV

In this article, we’ll begin by discussing regarding why install a Kodi on a Smart TV. Next, we will talk about the ways to install Kodi on a Smart TV. As you may know, many TVs offer different operating systems and user interfaces that might not match the requirements of Kodi. However, if your Smart TV doesn’t support Android, don’t worry, we’ll examine a few other options so that you can enjoy watching IPTV channels on your Smart TV via Kodi.

Other Applications you can use to have IPTV in Smart TV

Kodi is not a common application for Smart TVs but you can consider it as an option if you in love with Kodi. Due to some restricted policies around Kodi and IPTV streaming in general, some add-ons must be installed through third-party repositories and added to your Kodi app.
How to install IPTV on Kodi?

We suggest other applications like:

IPTV Smarters
Smart STB
SIPTV app
SS IPTV app

 

Is there an official Kodi app for Smart TVs?

The answer is no. However, many smart TVs run on an Android-based operating system and that means you can install a Kodi Android app on these TVs. The installation might be a little difficult and some TVs might not even have access to the Google Play Store so that means the only option you got is to sideload Kodi to your Smart TV via a Flash Drive or a Memory Stick.

Make sure your TV supports Android in the beginning. First, we talk about Smart TVs that have access to Google Play Store, then, we talk about the ones that don’t have access.

Smart TVs with access to the Google Play Store

This will make things very easy and you can install Kodi on your Smart TV in a matter of minutes.

  • Go to the Google Play Store app on your smart TV.
  • Next, click on the Search box and type Kodi and press enter on your remote.
  • Now, find Kodi on the list and press download and click on install. This will start the installation. The download size is smaller than 90 MB so it shouldn’t take much time to download.

That’s all, it was that simple!
Kodi should be now installed on your TV and it will be available on the Apps section of your Smart TV.

Smart TVs without access to Google Play Store

If your Smart TV doesn’t have access to Google Play Store, you can still install Kodi on it, however, it will be a little complicated. Below is a plain and simple guide for sideloading Kodi to a Smart TVs without Google Play Store.

  1. Start by downloading the Android Kodi app from below URL. https://kodi.tv/download.
  2. You will be presented with different choices here, you must select the one that is most suitable with your TV hardware specifications.
  3. You can find more information from your TV manual or the website of the manufacturer.
  4. Save the .apk file on your local storage and copy it to a flash drive or a memory stick and connect it to your Smart TV USB.

Installing the .APK file on the TV

At first, please make sure that you enabled install from “Unknown Sources” from your TVs settings. Otherwise, the installation will start on your TV. Now use the “File Manager” of your TV and go o the location of your flash drive and click on the .APK file you just download.
After a few seconds, the Kodi will be installed on your TV and you can start it from the Apps list of your TV.

TVs without Android!

If your TV doesn’t support the Android operating system, this means that there is no way that you can install Kodi directly on it. However, there is still 2 way to enjoy the benefits of Kodi on your TV.

  • Using an Android-based Kodi box.
  • Run Kodi on a PC and cast the video to your TV.

TV setup box

This is the best and most used method for enjoying the benefits of Kodi and IPTV streaming on your TV. There are so many different options to chose from on the market, but we highly suggest an Android-based setup box and Apple TV which is based on iOS.

Casting Kodi from other devices

The other way for having Kodi on incompatible smart TVs is screencasting which is the process of running Kodi on a computer or Android device and cast the output to your TV.
Most of the smart TVs has the feature to receive screencasts from an external device. There are two common apps for screencasting.
How to use IPTV on Chromecast?

How to exactly manage screencasting on your TV is beyond the reach of this article since screencasting will vary from TV to TV as each operating system will come with different screencasting methods. What is Plex?

You might need to do a google search to find the exact way for your specific device to your exact TV. However, the procedure is not very complicated and will be done easily. Please note, some TV manufacturers call this feature screen mirroring rather than screencasting.

Verdict

We tried to explain all the different methods for having Kodi and IPTV and using its benefits on Smart TVs in this article. If you know other methods and ways to enjoy having this amazing App on Smart TVs that wasn’t mentioned in this article, please feel free to discuss it with us in the comment section down below.

How to setup IPTV on Microsoft devices via MyIPTV Player?

This is an exceptional media player with EPG to play your IPTV channels on your Windows Phone, Windows 10, and Xbox One.  You can simply load your M3U playlist from storage or remote source and you are good to go. What is M3U?

You can download this app via the link below:

https://www.microsoft.com/en-us/p/myiptv-player/9pjj2nmbf0tr

How to add IPTV channels to MyIPTV Player App

Step 1: Start by downloading the app from the Microsoft Store, Xbox Live Store, or Windows phone store, and start the application once it is downloaded.

Step 2: Go to “Settings” and select “Add new playlist and EPG source” and proceed to the next step.

Step 3: Now on the “Remote Channel List section“, in the first field, enter a name for your playlist, and in the second field insert your M3U playlist URL. Now click on “Add remote list” and proceed to the next section.

Step 4: Now head back to the settings section again and on the Select channel playlist section select the playlist you just added and click on “Refresh“.

Step 5: Now click on the “Channels” tab and in here you can start watching the channels you just added to your MyIPTV Player App.

MyIPTV Player App features

  • HTTP Live Streaming (HLS) and MPEG TS supported
  • Channels are automatically grouped based on channel data
  • EPG support built-in – Recording option for channels
  • Favorites management built-in
  • Multiple channel playlists supported
  • Download video-on-demand (VOD) streams
  • Download center and history for VOD files
  • Channel filtering options – PIN protection
  • Media player option which could use the VLC library for media playback or Windows 10 media player
  • Option to add channels manually in app settings

Developed by iptvhelpcenter.net

How to change channel’s audio on VLC?

Sometimes the channels you watch on a VLC media player have multiple audio channels. For example, all Nordic channels have multiple audio languages and you can select any language from the list. How to watch IPTV on VLC?

How to change the audio channel

In order to change the audio channel, you must “Right click” on the middle of the screen and select “Audio”  and then “Audio Track” as depicted in the above picture. Here you can select the language you want and the audio channel will change.

If you think we missed out on anything else, feel free to discuss it with us in the comments section down below. Thank you.

Developed by iptvhelpcenter.net

How to install Kodi on FireTV?

Amazon FireTV is a powerful media box which can turn your ordinary TV to a smart one. IPTV channels, apps, games, TV episodes, and HDMI port are some of it features. Many users prefer to set up Kodi on this device by which the streaming of multimedia will be available. In the following two different ways are explained. What is Amazon FireTV?

First Method:

  • Go to Settings and scroll down to System.
  • Find Developer Options and Enable ADB Debugging and Apps from Unknown Sources.
  • Now on the App Store search for Kodi Downloader
  • Open the installed app and paste the following link and click on the Download button.
  • Once the App is downloaded, you will get the option to Install Kodi. Click on the Install button.

Now Kodi has been installed on your FireTV. How to setup IPTV on Kodi?

Second Method:

In this method, you have to first install Kodi on your smartphone. With the help of Apps2Fire, an Android app that helps you install Android apps on Amazon FireTV, you can transfer the apps from your smartphone to your device. What is a Kodi addon?

  • Navigate to Settings/System/Developer options. Turn on “Apps from unknown sources”. After installation completion, you can turn it off.
  • Record your FireTV IP address by going to Settings/System About/Network.
  • Install Apps2fire and insert the recorded IP address.
  • Install Kodi on Your Phone.
  • Click on Menu then, the Upload button. In the full list of applications, select Kodi.

The Installation will start. Any error you see means this method will not work for your device and it had better follow the first method.
Apps2Fire is a simple app which allows you to download Kodi on your FireTV. If everything works perfectly then putting Kodi on FireTV is successful.

Developed by iptvhelpcenter.net

How to Control KODI remotely by Phone?

With the help of Kodi, IPTV users can stream thousands of live TV channels on their Android set-up box, Smartphones, gaming consoles such as Xbox One, Personal Computers, and enigma-based devices such as Raspberry Pi.

KODI users can utilize an invaluable app called Kore Remote which virtually simulates a comprehensive remote control device and can be used easily on smartphones, tablets, and iPads.

Kore, the Official Remote for Kodi

Currently, there is an official app designed exclusively for Kodi, and its called Kore.

Here are the main features:
– Command your media center with a simple-to-use remote
– Including different color themes
– EPG (See what’s currently playing), including related information (movies, TV shows, music, pictures, and add-ons)
– Switch, sync or download subtitles
– Switch to the wanted audio streams
– Switch to live TV channels and trigger recording on your PVR/DVR setup
– Wake-on-LAN and other power control actions that the selected device supports;

Where to Download

You can download this app via the below URL’s based on your device:

Androidhttps://play.google.com/store/apps/details?id=org.xbmc.kore&hl=en

iOS: https://apps.apple.com/us/app/official-kodi-remote/id520480364

Developed by iptvhelpcenter.net

What is the Pros and Cons of Kodi?

The ability to install Add-on is probably the most fascinating feature of Kodi by which customers can install numerous add-ons that customize its interface. The open-source feature makes it available for users to build their own favorite add-on.

You can think of a Kodi Addon as a base application that increases the functionality of the main application. There are actually thousands of add-ons that can be connected inside Kodi that will turn this media center application into the best online streaming platform.

Accordingly, there exist so many unauthorized add-ons by which users can stream pirated content.

As Kodi is a free app, you can install it on a variety of media boxes such as Amazon Fire TV, Raspberry Pi, PC and etc. However, the main drawback of Kodi is that streaming Kodi content is quite tough as well as its interface is not user-friendly in comparison to other apps such as Plex. What is a Kodi addon?

The advantages

Kodi is created to work without a keyboard and mouse.
You will have all your selection of artists/albums/songs in a specific place on Kodi, and you will have the option to navigate in a series of filters: Artists, Genres, Albums, and a lot more.

With Kodi, you can use a series of physical remotes, like MCE and Harmony, or you can use an App on your Android or Apple device, like Yatse (Android) or Kodi Remote (Apple). But you can use a keyboard as you wish. Kodi just has the possibility to use other types of remotes. Control Kodi remotely by smartphone or tablet (XBMC)?

Kodi offers an interface clean and very natural, with a lot of images of the artists, and album covers provided from the images database and a lot of information about the artists/albums like Release Year, Genre, record company, and other info provided from databases and with some skins, you can have the lyrics on display. Each skin has some particularities and depends on your taste. How to setup IPTV on Kodi?

The disadvantages

Warning: Kodi Add-ons (Specially Kodi Stalker) are not an Official application for watching IPTV, Hackers use this application to steal IPTV line details.

If you know nothing about tags on your song files, you will have a lot of work to have all the benefits of Kodi to play your songs. because Kodi needs these tags to compose your library. if your song files have the wrong tags, Kodi will insert your song file in the wrong place inside the collection.

We don’t see any disadvantage in using Kodi to listen to my songs on my HDTV and that remote that we’ve shown. The only problem is the tags because it’s a lot of work, but you only have to do it once.

Developed by iptvhelpcenter.net

What is Kodi addon?

You can think of a Kodi Addon as a base application that increases the functionality of the main application. There are actually thousands of add-ons that can be connected inside Kodi that will turn this media center application into the best online streaming platform.

Kodi presents a listing of add-ons through its official repository but there are thousands of extra add-ons accessible through different sources on the Internet. How to setup IPTV on KODI?

Some of the common favorite Kodi add-ons grant access to movies, television shows, live TV streams, and live sports events. These add-ons are created to explore the Internet for media content and assist the video or audio streams within your Kodi.

Kodi add-ons are constantly developing, modernizing, and being produced. So be sure to explore the internet frequently for any type of special addon you may need on your Kodi device. Add-ons are open for any platform that can install the Kodi program.

Kodi add-ons normally come in a .zip format and can be connected with very little work by utilizing the add-ons section below the settings tab inside Kodi.

Kodi Repository

Kodi repository or “repo” is a feature that includes various Kodi add-ons that are split up into different sections. You can also install a Kodi repository that includes multiple add-ons that could all serve you in one place. You can find more information at:

https://kodi.tv/addons

With a repository, add-ons are constantly being updated once a brand-new or greater version has been released. Kodi repositories are additionally installed like different add-ons, by a .zip file inside the Kodi settings section.

What is a Wizard in Kodi?

A Kodi Wizard normally adds a list of various features that you can pick to install on your Kodi. A wizard may also add some helpful gadgets that can assist with buffering issues and other problems.

You will notice that everything described before such as add-ons and repositories is regularly all mixed into a wizard. The Kodi Wizards can also be established as a .zip file within the Kodi settings section.

ARES Wizard

ARES Wizard is a Kodi add-on that provides you with the tools you need to lower the buffering issues while watching IPTV streams as well as doing maintenance, getting back up, and doing a factory reset on your Kodi.

IPTV Simple Client

This is a basic PVR add-on for receiving IPTV channels and EPG directly in your Kodi application. IPTV Simple PVR Client supports Kodi IPTV m3u list, streaming of Live TV for multicast/unicast sources, and even allows you to listen to Radio channels and EPG.

Conclusion

With all these great Kodi add-ons, watching TV is never going to be the same. These great Kodi IPTV add-ons will enhance your experience like never before. If you think we have missed out on any other IPTV Kodi add-ons, please let us know in the comments section down below.

Developed by iptvhelpcenter.net

How to add EPG on Kodi?

Kodi is an open-source media player which is a free application that functions as a digital media center. This application enables you to play your media, and cast it between various devices, from a primary location to other devices. How to setup IPTV on Kodi?
You can use Kodi on most the operating systems such as Android, Microsoft Windows, Linux, iOS, and devices such as Amazon FireTV, Smartphones, Apple TV, Xbox, and PC.

How to add EPG to Kodi

Step 1: Open Kodi and click on “Add-ons“.

*Please note, the installation process is very similar in all operating systems.

Step 2: Now click on “My Add-ons” then “PVR clients“.

Step 3: Now select “PVR IPTV Simple Client“.

Step 4: Proceed to PVR IPTV Simple Client and select “Configure”.

Step 9: Select “EPG Settings”.

Step 10: On “Location” select “Remote Path (Internet address)” and enter “EPG URL” at “XMLTV URL”. You can ask for the EPG URL from your IPTV provider.

Step 11: Click “OK” and reboot your KODI device.

Now TV guide will be added next to your TV channels.

Conclusion

Kodi is able to play virtually every media content that you can imagine and is very customizable. Kodi allows you to change the color, and skin of the user interface based on your tasteful preferences. You can also download tons of various add-ons to make your entertainment world even more remarkable.

Developed by iptvhelpcenter.net