How to fix TVIP remote control problem?

Estimated reading: 2 minutes 0 views

TVIP boxes are using to watch IPTV contents, they are almost same as MAG boxes but with different software.
What is TVIP and how to setup it?

A common problem on TVIP boxes is that you may see the remote control of your box does not work. In this article we will help you to fix TVIP remote control which is not working.

Before starting please do a test to make sure if it’s battery problem or not. Click some buttons on remote control and check if the red light on remote blink or not.
If the red light is NOT blinking so the problem is the remote control battery, change the batteries! (if still same no light after changing the battery the remote control is broken and you need to buy a new one).
If the light blink and the remote does not work then the problem is the remote control IR (Infra Red) problem. You can fix it by doing the below steps.

How to fix the TVIP IR remote issue?

Step 1: Press “Setting” (left side of S.INFO) and “Recall” (left side of “0”) at the same time.

How to fix TVIP remote control problem?

Step 2: Point the remote to the box then press and hold the “S.INFO” button for 10 seconds.
This process will change the IP remote code page. After 10 seconds you will see the message that “IR remote code page was changed”

How to fix TVIP remote control problem?

Now the TVIP remote control recovered!

Please leave a comment if you need any more help with TVIP remote control.

Developed by

Leave a Comment

Share this IPTV Tutorial